欧美日本黄视频,51精品国自产在线,女女同性女同一区二区三区91

BYD Cordless Forklift Maintenance Standards-

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

When the gear is adjusted to the tortoise speed, the speed of the battery truck will be limited, and it will not be too fast when accelerating

The battery is the power source of the vehicle and should be charged in time and maintained frequently

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

There is no environmental pollution, and it can meet the requirements of more application scenarios, expand the scope of application, and increase more business opportunities; 4

How often is the forklift license reviewed? The "Special Equipment Operator Certificate" is reviewed every four years When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

Electric transport truck manufacturers also provide high-quality after-sales service, which can help drivers easily solve faults

It has the ability to pick up cargo directly from the side without turning, so it is mainly used to pick up long cargo such as wood strips, steel bars, etc

Before lifting the forklift, make sure that the forklift has completely penetrated the bottom of the pallet

Each thing has its own use When starting the forklift, maintain a moderate starting speed and do not start too hard

BYD Cordless Forklift Maintenance Standards-

Be careful! Unauthorized driving is not allowed

Because there are differences in the level of high-tech capabilities in various countries around the world, there are also huge differences in the application of new energy technologies on forklifts With the development of economy and the improvement of environmental protection and energy saving requirements, all-electric reach stackers are developing rapidly

First, the altitude of the electric forklift workplace should not exceed 1200m

2 Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse Then the loading platform is moved up to the corresponding storage height, the photoelectric detection sensor detects that the storage space on the shelf is empty, the fork is extended to the corresponding storage space, the platform is lowered, and the goods are stored on the three-dimensional shelf 3 Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged The most obvious point is that you can see that their parameter tables are basically the same

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

After years of development, the engine technology is relatively complete and the domestic price is not high

BYD Cordless Forklift Maintenance Standards- After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Prevent such accidents from happening again! 1

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small As for whether to choose a single-sided or double-sided pallet, it should be selected according to the type and configuration of the forklift Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading

When enterprises choose warehousing and logistics equipment, there are many factors that need to be considered

In addition to Zhongli, companies such as Noli, Ningbo Ruyi, and BYD Forklift have also made good progress in the electric walk-behind warehouse truck market segment, and are constantly seeking innovative breakthroughs in structural design optimization, load capacity, ergonomics, and easy maintenance The wireless camera is compact and has strong magnetic adsorption

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Forklifts play a very important role in the logistics system of enterprises and are the main force of material handling equipment

Advantages and disadvantages of electric transport trucks and manual transport trucks Advantages: Electric transport trucks are electrically driven, and all operations are based on handles, which can be easily mastered

The overall design of the equipment conforms to ergonomics

Electric transport trucks are powered by batteries, driven by DC motors, and advanced by hydraulic power units; they have the advantages of fast operation speed, small size, simple and flexible operation, and low noise

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info