韩日精品视频一区,久久青青色综合,中文在线аv在线

BYD container forklift charging time- When the warehouse electric forklift forks goods onto the shelf, it should slow down and pay attention to the height of the double forks

Large-tonnage pallet trucks can reach 5-25 tons in China, which can meet the needs of large-tonnage cargo handling, stacking, loading and unloading, and freight

BYD forklifts still perform well in cold chain logistics and have huge room for market expansion

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

Slow down early when changing

It is strictly prohibited to park in the aisle or in places with uneven slopes

Lifting is achieved by repeatedly moving the hydraulic cylinder up and down by manpower to lift the goods

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

The hydraulic synchronization solution described in this article can be applied to the design of forklifts with double telescopic gantry structures

Whether purchasing an electric transport truck, an electric stacker or a manual hydraulic forklift, in addition to considering its own site, environment and other conditions as well as requirements for battery life, product quality, etc

If this new technology is organically combined with an electric smart forklift, the forklift can be unmanned; if it is combined with an AGV forklift, the user only needs to issue instructions to the forklift in a safe area, and the forklift can be fully automated 3

BYD container forklift charging time-

Any breakthrough and application of new technologies should bring breakthroughs to the development of new energy forklifts

Precautions for using cold storage forklifts Cold storage forklifts are special equipment

(10) It is not allowed to use the inertia of braking to release objects If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified In terms of running speed, electric transport trucks only need to be driven by an electric motor, which is faster than manual transport trucks that are pulled by manpower

Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

Compared with traditional electric pallet trucks, it is more compact and flexible, can operate in narrow spaces such as carriages and elevators, is easy to operate, and has a more acceptable price

0 to 52 Principles of forklift selection 1

The semi-electric forklift factory said that it can be used in a wide range of operations and is suitable for loading and unloading, stacking and moving of finished goods in ports, stations and enterprises

It is more efficient to use and can save both time and effort

011

BYD container forklift charging time-

The above are some of the advantages of BYD lithium battery forklifts

Forklift

Its application has brought a lot of convenience to industrial production

Fork: To improve the efficiency of cargo storage and retrieval and reduce the width of the storage channel, this unmanned forklift is designed with a two-way telescopic fork to complete the cargo placement and retrieval by sideways fork entry

It has the advantages of simple and flexible operation, fast lifting of goods, high efficiency, noise reduction and no pollution

The first is three-dimensional warehousing based on rail stackers, which is mainly used in scenarios with long aisles and high shelves

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

This is the top priority

When the vehicle needs to slow down, release the accelerator pedal and lightly step on the brake pedal, so that the energy of deceleration can be fully utilized

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs

Heavy-duty design, compact structure, suitable for small spaces

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

of the forklift

Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info