日韩在线卡一卡二,亚洲欧美网站,乱人伦视频在线

BYD's reach-type lithium-ion forklift series-

6%; export sales volume was 182,000 units, a year-on-year increase of 175

However, the electric hydraulic transporter must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

A pallet truck is a type of warehousing logistics equipment used for cargo handling

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

The long-lasting battery endurance can keep the machine in good and optimal condition

Gasoline forklift: 1-7 tons, including single fuel and dual fuel

From the above, we can see that both electric pallet trucks and manual trucks have many advantages and inevitable disadvantages They are especially suitable for food, fishery, medical, chemical and other places

Including: retail logistics circle, manufacturing logistics circle, clothing logistics circle, home furnishing logistics circle, logistics equipment circle

, another important consideration is the price of the forklift

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

(2) For forklifts manufactured before December 1, 2023, it is not required to install safety monitoring devices, and the regular (initial) inspection may not include the corresponding items

BYD's reach-type lithium-ion forklift series-

Regardless of whether the battery has obvious temperature changes during the charging process, the electrolyte will not be turbid, which extends the service life

From the above we can see that it is not difficult to find the cause of the abnormal noise of the electric pallet truck, but it requires the driver to have enough patience to solve it

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

It involves a whole set of software matching and service support

Forklifts are special equipment used in industrial and logistics warehouses

Combination of forklift and vision The combination of 5G unmanned intelligent forklifts and vision can be better applied to various working environments 4

Finally, the fork is retracted and the loading platform falls back to the low position

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

Forklift tonnage configuration

The load capacity is 1

For high lift, visual secondary positioning is added, and accurate picking and placing of goods can be achieved in a closed environment by binding the fork teeth and the shelf, effectively solving the errors caused by deformation of vehicles and shelves after many years

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

Before continuing to operate, the direction selection switch must be restored to the middle position

BYD's reach-type lithium-ion forklift series-

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

Check the reversing lights; 6 When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging 4 To calculate how much aisle width to reserve for an electric hydraulic forklift, you must first know a formula: right-angle stacking aisle width = forklift minimum turning radius + forklift front overhang + forklift fork/pallet length + safety distance

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance

At lower temperatures, higher relative humidity is allowed

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor It also reduces the huge workload caused by labor costs Repeated operation experience is required to achieve proficiency, accuracy and safety From 2015 to 2020, the domestic market share of overseas brands fell below 10%

Relying on the group's advanced core technology advantages such as batteries, motors, and electronic controls, BYD Forklift has successively developed counterbalanced forklifts, reach forklifts, pallet trucks, stackers, tractors and other products

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info