波多野结衣在线播放,中文日产幕无线码一区二区,√天堂8资源中文在线

BYD warehouse electric forklift maintenance and operation process pictures- There is no need to add water or acid, which improves the office environment, increases staff satisfaction, and is beneficial to staff stability; 5

Carrying goods within the reasonable load range of the explosion-proof electric transporter has high carrying efficiency and saves transportation time

SZ), and Dongjie Intelligent (300486

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

The specific measures are as follows: 1

The handling work that originally required dozens of people to complete can now be completed by a few forklifts and a few people

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

1, Ltd

The turning radius of a three-wheel forklift is much smaller

BYD warehouse electric forklift maintenance and operation process pictures- Box cover Removable for good visibility when in use Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze Different cold chain products have different requirements for cold storage temperature, which also determines the different grades of cold storage forklifts, as shown in Table 1 and Table 2 The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump ※ ACCIDENT ※ In emergency or dangerous situations ※ When welding Notice! When welding around the car body, the battery is easily damaged The forklift must not be started before the battery is fully charged The body design of the electric transport truck is suitable for the workplace and has a good service life

There are four inspection windows at the commutator end of the railway train motor for regular inspection and maintenance of the motor commutator and replacement of brushes

The working pressure of the equipment's overflow valve is not enough and needs to be adjusted

What are the advantages of BYD's new energy forklift? As we all know, the application of new energy technology has made great progress and its application field is also relatively wide

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work

When the truck starts, make sure there is no one nearby and no obstacles or potholes on the road

Advantages and disadvantages of electric transport trucks and manual transport trucks Advantages: Electric transport trucks are electrically driven, and all operations are based on handles, which can be easily mastered

"No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs

BYD warehouse electric forklift maintenance and operation process pictures-

Pay attention to the strength when turning the knob

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

Try to turn it slowly

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

The double-drive axle makes maintenance easier to operate and more convenient

As an important part of cold chain logistics, forklifts are widely used in cold storage, and their market demand is also growing rapidly

The vehicle can be easily pushed under the base of the cargo box, and then the chassis is raised by hydraulics to lift the goods, and the goods can be dragged to move

The operating noise of electric forklifts is also very small, and this feature has been unanimously recognized by the majority of users

In simple terms, lifting and moving are all achieved by electric drive

Hangcha Group, together with Contemporary Amperex Technology Co

It is recommended to use them outdoors

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info