在线视频国产区,欧美精品资源,午夜影院一区

BYD Pallet Forklift Usage Specifications- Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

In addition, the company is in a period of rapid growth and needs to give priority to brand promotion, so the pricing is relatively low

? AC drive system, stepless speed regulation, safe, silent, emergency reverse device/emergency brake switch

For example, Anhui Heli, Anhui Wannan Motor Co

When starting the forklift, maintain a moderate starting speed and do not start too hard

The new Hyster stacker can handle loads up to 2 tons, can achieve double-sided pallet stacking and handle open palletized loads, as well as transport and load or unload pallets stacked two high on a trailer

Counterbalanced forklift operators should try to avoid sudden stops and turns

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal

They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance0SD will replace the current Hyster P2

, jointly invested in the establishment of Hangzhou Pengcheng New Energy Technology Co

As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages

However, electric pallet trucks are much more expensive than manual trucks, and they take time to charge

0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers

The routes can be set in advance, and the unmanned forklift will work according to the set routes

BYD Pallet Forklift Usage Specifications-

Among them, whether the parts are domestically produced or imported, their size, capacity, and battery life are all important factors affecting the price of the forklift

The cold resistance can reach minus 40°C, and it can work normally at high temperatures up to 60°C The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation Many customers don't know that the main mechanism of metal corrosion is the conversion of raw metal into metal oxides, which causes structural parts or components to rust, damage, or even become irreparable and scrapped

Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze

Try to turn it slowly

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

When operating a reach truck, try to use less long-term and long-distance acceleration

The altitude shall not exceed 1,200 meters

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation7MPa) to drive the lifting hydraulic cylinder and the tilting hydraulic cylinder, it is difficult to achieve a low selling price

BYD Pallet Forklift Usage Specifications- Models with fixed platforms are also available

Our equipment transportation relies on high-quality employees, sound process technology, quality certification system, product business consulting and after-sales service, keeping pace with the times, and providing reliable equipment transportation solutions for individuals or companies

Steering 1

They are widely used in the warehousing industry because of their compact body, flexible mobility, light weight and good environmental performance

Flexible control and precise positioning; 3

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

Overloading or partial loading of goods is strictly prohibited

Making sharp turns at high speeds can cause the vehicle to lose lateral stability and tip over

The operating noise of electric forklifts is also very small, and this feature has been unanimously recognized by the majority of users

Nowadays, many warehouses will purchase pallets before purchasing shelves so that forklifts can carry out transportation operations

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info