嫩草国产精品入口,亚洲精品欧美专区,亚洲激情国产

What are the maintenance contents of BYD hand-pulled electric forklift?- Finally, it is determined whether the design scheme in this paper meets the actual needs 7" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices 3

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6 If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle 2

The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

Among them, the lifting height is detected by a pull rope encoder

jointly established Anhui Wanxin Motor Co

Lifting control Turn on the key switch and operate the handle in the indicated direction to raise or lower the fork

Xiongtao Power lithium batteries are safe and efficient, have higher energy conversion efficiency, support long-term operation, and make full use of every second

What are the maintenance contents of BYD hand-pulled electric forklift?-

(3) Customization Customization refers to providing product functions suitable for customers in a targeted manner according to the needs of customers or working environments

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

Strengthen safety management at the work site

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

It greatly improves work efficiency and reduces labor cost investment

Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

The load range of electric transport trucks is relatively wide, ranging from one ton to ten tons

The forklift in my country is the product of the evolution and merger of loaders and large-tonnage forklifts

What are they? The following is a brief sharing by BYD lithium battery forklift: It needs to be emphasized that the difference between lithium-ion forklifts and traditional electric forklifts is not as simple as replacing batteries

High stability coefficient: All mechanical material equipment must make progress in stable design, otherwise it will be difficult to develop in the long run

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

If the welding current enters the battery, it will cause damage

Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life

What are the maintenance contents of BYD hand-pulled electric forklift?-

won the gold award in the parts category for its high-performance electric industrial vehicle integrated drive key technology research and development, Fanji Technology (Suzhou) Co

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

The use of helical teeth ensures optimal meshing, reduces noise levels and thus reduces noise pollution

24% over the previous year, especially electric walk-behind storage vehicles, which still maintained a relatively high growth

What advantages do lithium batteries have over storage batteries in electric forklifts? In the current battery market, lithium batteries have quickly occupied the market with their advantages of safety, cost reduction, low maintenance cost, long service life, energy saving and environmental protection, and are gradually replacing traditional lead-acid batteries

The cold resistance can reach minus 40°C, and it can work normally at high temperatures up to 60°C

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals

5-5

Generally speaking, the larger the load capacity of a forklift, the more expensive it is

When an electric truck is used with a pallet, the pallet should be selected based on the load range and configuration of the electric truck and the material and specifications of the pallet

亚洲国产精品高清久久久_av美女网站_日韩网站在线_一区二区三区精品视频在线观看 _精品亚洲永久免费精品_日日噜噜噜夜夜爽爽狠狠 _精品国产乱码久久久久久天美

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info