欧美性猛交xxx,国产亚洲人成网站在线观看,欧美视频国产精品

What are the contents of the first-level maintenance of BYD electric stand-on forklift?-

In 2020, benefiting from the rapid control of the domestic COVID-19 epidemic, the domestic forklift demand market grew rapidly

(10) It is not allowed to use the inertia of braking to release objects

Explosion-proof pallet trucks are generally used in some dangerous places with very high safety requirements, such as factories with a lot of dust, gas stations, gas stations, and chemical industries, or in the workshops of some electronics factories that are very sensitive to electronic interference

※ The operating function is intact

Adjust the height of the forks so that they are about 100mm-200mm from the ground

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

Say goodbye to the traditional camera that needs to be connected to the power cord, and you no longer have to worry about lifting and twisting the wire

Except for a few forklifts that are powered by manpower, the others are powered by electric motors

SZ), Today International (300532

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

The working driving principles are roughly the same, and accessories in the same brand series can be replaced, such as wheels

What are the contents of the first-level maintenance of BYD electric stand-on forklift?-

The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

At present, most companies use this technology

You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you It can provide enterprises with complete warehousing solutions, allowing enterprises to purchase electric transport trucks that are suitable for them and have the highest cost-effectiveness The following BYD forklift editor will introduce to us the advantages of forklift lithium batteries compared to lead-acid batteries

When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

As for the preventive measures, they are not without them

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

0 tons, and the width of the working channel is generally 3 Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident and Hangzhou Pengcheng New Energy Co So, how can we complete the forklift of goods well? Electric forklift manufacturers have prepared a detailed tutorial for everyone

What are the contents of the first-level maintenance of BYD electric stand-on forklift?-

SZ), etc

3 It can be used to work better in our warehouses and improve work efficiency

The reduction in contacts can effectively reduce the maintenance cost of electronic components6%; export sales volume was 182,000 units, a year-on-year increase of 175

What is an unmanned forklift? "Unmanned forklift", also known as "smart forklift", is an intelligent industrial handling robot

With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

The electrical parts and connectors must be arranged inside, and protective covers can also be added

Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info