国产情侣久久,丁香花在线观看完整版电影,欧美一区二区三区影视

How to move the BYD forklift when it runs out of power?-

The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation

In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

When the diodes in the two leftmost grids flash alternately, it means that the power is low and the battery needs to be charged

BYD forklift solutions in cold chain logistics: Cold chain logistics handling equipment has the most obvious requirements for low temperatures

Among so many kinds of batteries, how should we choose to buy a battery with high cost performance, good quality, long battery life and durability? Putting aside the price of forklifts, electric transport truck manufacturers have a few suggestions for everyone Own weight Automatically guide the weight of the electric truck with battery

Repeated operation experience is required to achieve proficiency, accuracy and safety

“It features heavy-duty components, a rugged design, a reliable electrical system and easy serviceability, and can be combined with other options to further match the truck to the specific application

Take Noli as an example

However, this data generally has a deviation of 100mm, so it is recommended that companies add 100mm when calculating

Charge the battery in time

How to move the BYD forklift when it runs out of power?-

If the vehicle has a braking function, the kinetic energy during deceleration can be recovered

There are many specifications with and without pedals

In order to make huge profits, they often replace the "three no" products produced by small workshops with famous brand logos to deceive buyers

Try to turn it slowly

Energy saving and safety

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

Automatic power-off function: When the forklift stops for more than 10 minutes, the power switch can be automatically cut off regardless of whether the key switch is closed

Putting aside the brand of electric forklifts, let us now learn about the maintenance knowledge of electric transport trucks

There is no need to add water or acid to lead-acid batteries, which greatly reduces the workload and saves labor costs and material costs; 2

The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

The reach forklift among warehouse forklifts has a gantry that can move forward or retract as a whole jointly established Anhui Wanxin Motor Co

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

It starts with one button and releases pressure with a foot pedal

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

How to move the BYD forklift when it runs out of power?-

Secondly, the compatibility of the power management system (BMS)

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over

Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements

The full load climbing ability of more than 8% makes the operation more common

If it is lower than the standard value, it indicates that the charging voltage is too low Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

From raw materials, to battery cells, module structure, to the overall manufacturing process, and ultimately marketing, BYD can be said to have maintained its core competitiveness in every process

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info