三级欧美日韩,精品伦理精品一区,中文字幕中文字幕在线中高清免费版

BYD four-point electric forklift maintenance and operation process pictures- Cause: The charger's operating voltage is out of regulation or faulty, or the battery is faulty

The lifting, lowering and turning of the forklift are driven by the hydraulic system

Forklift is a non-manpowered tool for transporting goods in warehouses

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

It has high storage efficiency, strong scenario applicability and moderate cost

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope Electric transport trucks are no exception

It is already very difficult to find a traditional internal combustion forklift on the market

8 Check whether the emergency cut-off switch of the electric pallet truck is turned off

Charge the battery in time

Secondly, for a battery forklift, you also need to consider whether the battery is imported or domestically produced, whether it is maintenance-free or a traditional lead-acid battery

At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

BYD four-point electric forklift maintenance and operation process pictures-

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

It should also be noted that no matter what brand of electric forklift, some valves or parts have high requirements for cleanliness and need to be cleaned regularly to keep them clean So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

(3) Release the operating arm and it will automatically return to the parking brake position

, a subsidiary of Hangcha Group, achieved sales of 120 million forklift AGV bodies in 2019SZ), and Dongjie Intelligent (300486 Generally, the number of charge and discharge times of forklift lead-acid batteries is about 1,500 times, and the service life is about 3-5 years 5 Check whether the emergency cut-off switch of the electric pallet truck is turned off

It can be driven electrically, but it requires manual lifting by our operators, which is more convenient and quick to operate

Explosion-proof electric transport trucks are suitable for weighing goods during transportation in logistics, warehousing, workshops, industrial and mining enterprises, chemical laboratories, construction and other industries

The development of its industry is closely linked to the application and breakthrough of new technologies

Huge market segment space In the field of electric forklifts, the rapid growth and technological innovation of domestic electric walk-behind warehouse trucks have also been eye-catching, and have become an important "engine" driving the rapid growth of my country's forklift industry in recent years

BYD four-point electric forklift maintenance and operation process pictures- The entire freight process can be completed by one person, which has replaced manual transport trucks to a certain extent

Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

There are mainly battery forklifts and diesel forklifts

Brushless DC motors are suitable for industrial new energy electric vehicles powered by batteries (or other DC power supplies), such as electric forklifts, electric rail-mounted flatbed trucks, rail-driven electric trucks, large tractors, etc

The all-electric transporter is a kind of logistics storage equipment that uses electricity to control walking and lifting

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

Check whether there is any fault in the drive motor system

As for the preventive measures, they are not without them

They use batteries as the power source to drive the travel motor and the hydraulic system motor to complete travel and loading and unloading operations

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

Forklifts originated in the United States, flourished in Japan, started late in China, but have developed rapidly

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info