中日韩av电影,一区二区三区国产精华,国产视频视频一区

BYD battery forklift battery voltage- Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

Have the corresponding safety technical knowledge and skills for special equipment operators with forklift certificates; 6

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur

From 2015 to 2020, the domestic market share of overseas brands fell below 10%

3 Putting aside the brand of electric forklifts, let us now learn about the maintenance knowledge of electric transport trucks The all-electric transporter is a kind of logistics storage equipment that uses electricity to control walking and lifting The cost is relatively low Unlike internal combustion forklifts, electric forklifts are mainly powered by electricity (powered by forklift batteries), and the processing accuracy and automation are significantly improved, which greatly reduces the labor intensity of operators

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

BYD battery forklift battery voltage-

When starting the forklift, maintain a moderate starting speed and do not start too hard

Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts If you have the key, take it out and give it to the custodian of the electric vehicle

It is a popular logistics storage truck at home and abroad

Flexible switching or modification of various attachments such as forks, clamps, side shifters, and adjustable forks

Comparing the take-off and landing speeds, manual trucks are slower than electric trucks and require manual operation, which is time-consuming and labor-intensive 2

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

If you add stackers in three dimensions, different heights, gantry structures, legs, legs, forward movement, etc

4 meters, so the two cannot be achieved at the same time

The precautions for cold storage forklifts mainly include the following aspects: 1

The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

BYD battery forklift battery voltage- From raw materials, to lithium batteries, module structure, to the overall manufacturing process, and final marketing, it can be said that BYD enjoys its own competitive advantage in every step 4 (7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances At present, green and low-carbon transformation has become a major trend of global development

Electric transport trucks are also called electric pallet trucks in operation

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

The following BYD forklift editor will introduce it step by step

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors

Introduction With the rapid development of the intelligent logistics and warehousing industry, the solutions for intelligent three-dimensional warehousing are constantly being updated and upgraded towards high storage capacity, high storage efficiency and low cost

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info