亚洲欧美综合久久久久久v动漫,成人免费看黄,999久久久亚洲

BYD warehouse forklift maintenance specifications latest-

The market demand for cold storage forklifts is huge

An electric forklift with excellent quality and simple operation is also very important

The fully electric pallet truck uses a 24V electronic system, and a set of integrated circuit controllers to steplessly adjust its speed to ensure a relatively stable speed and acceleration during driving

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control

How to operate a new electric transporter How to use an electric transporter is not difficult, practice makes perfect

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

Indeed, the openness of hardware configuration is almost the same as the opening up of the entire Apollo ecology

The operator must first understand the instructions for use of the counterbalanced electric forklift

This is the top priority

Easy to operate The easier it is to operate an electric transport truck, the more popular it is among customers and friends They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

BYD warehouse forklift maintenance specifications latest-

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

Pay attention to the working voltage of the ammeter

It has good maneuverability and can complete various tasks, reducing the investment in other transportation costs

The most familiar industrial transporter is the forklift Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading 7

Its smart handle integrates all switch buttons in the best reach position for easy operation

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

The use of 5G networks provides strong technical support for the popularization and improvement of factory automation

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

BYD warehouse forklift maintenance specifications latest- 11

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

The ultra-low temperature characteristics are significantly better than lead-acid batteries, and lithium batteries are more suitable for use in northern areas or frozen storages; 6

The axle has a compact structure and complete functions

What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur

A fork-reach-forklift refers to a forklift in which the shelf drives the fork forward and moves it beyond the front wheel to operate

No harm to people and goods

For example, the oil tank can be perforated, which is more conducive to the coverage of the spray gun nozzle and the shot peening treatment of the surface

They are the best choice for weighing goods moving over short distances

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

? Multifunctional handle, integrated control (acceleration, horn, emergency direction, lifting button), ergonomic design makes operation more comfortable

When the forklift battery is running out of power, it must be charged in time, and it must be parked in the charging area for charging

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info