日韩精品极品视频,国产欧美一区二区精品性色超碰,欧美大胆性生话

BYD hand-pulled electric forklift maintenance and maintenance knowledge- Check whether the contact points are worn In order to avoid many after-sales problems that affect work efficiency, it is best to choose batteries produced by manufacturers with good reputation and credibility, so that the quality is more guaranteed The noise value of the brake is related to the size How to operate a BYD forklift? Operating a BYD forklift is a technical job that requires certain knowledge and skills

The vehicle moves backwards

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large

The operation and control of electric forklifts are relatively simple and flexible

SZ), Today International (300532

PU polyurethane wheel: iron core coated with rubber, quiet, good wear resistance, not easy to damage the ground, suitable for painted floors

The rolling clearance of the inner and outer door frames shall be adjusted reasonably and shall not be greater than 1

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully 2 So how do we troubleshoot these faults? The following editor will give you a brief introduction

BYD hand-pulled electric forklift maintenance and maintenance knowledge-

Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

Loading and unloading issues of electric pallet trucks: 1

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

When vehicles enter and exit containers to load and unload goods, they should slow down, pay attention to the entry and exit height, and do not let the goods hit the roof to avoid damage to the goods

Battery The battery is fixed in the battery box, with a voltage of 24V and a standard capacity of 210Ah

At lower temperatures, higher relative humidity is allowed

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation It is a popular logistics warehousing truck at home and abroad

They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc

For example, the height of the warehouse door should be higher than the height of the entire forklift; after the goods are lifted to a certain height, what is the actual rated load of the electric forklift; consider how much weight each square meter of the floor can bear; it is also necessary to consider the road surface

Most of the imported electric pallet trucks have been equipped with power steering systems

BYD hand-pulled electric forklift maintenance and maintenance knowledge-

In summary, the synchronization of the mechanical structures of the four cylinders is finally achieved

Finally, let me introduce you to the mast inclination angle

They may also have certain failures during use

Check and adjust the brake system and add grease to the movable joints

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

Many customers don't know that the main mechanism of metal corrosion is the conversion of raw metal into metal oxides, which causes structural parts or components to rust, damage, or even become irreparable and scrapped

They are the best choice for weighing goods moving over short distances

5mm When welding, the ambient temperature should be above 0℃

Companies can consult electric transport truck manufacturers to choose the most cost-effective transport truck

If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified Carrying goods within the reasonable load range of the explosion-proof electric transporter has high carrying efficiency and saves transportation time The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1

Therefore, the use of explosion-proof electric forklift in specific occasions is necessary, and safe operation measures are also indispensable

In 2019, Hangcha Group clearly proposed a high-end, electrified, and intelligent product strategy, and achieved sustained growth by relying on advanced product layout and market expansion

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info