丰满大乳少妇在线观看网站,日本不卡免费高清视频,亚洲国内精品

How many hours is the best time to charge the battery of BYD Logistics Company's electric forklift?-

Electric transport truck manufacturers remind that nine-legged or Sichuan-shaped pallets should be used, and double-sided Tian-shaped pallets cannot be used

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value Development Status Forklifts are an important branch of construction machinery and one of the important equipment in the logistics industry Strengthen safety management at the work site

The forks are raised by an advanced electric hydraulic pump, and the forks are raised and lowered by the lifting and lowering operating handle

Since the existing magnetic stripe navigation and laser navigation have certain limitations, and visual navigation reduces some problems encountered in the implementation of the project through dynamic route planning, visual navigation is the development trend of future navigation

Therefore, if the damage is serious, it is recommended not to continue using it and directly recycle the forklift

The handle design conforms to the principles of ergonomics

Hydraulic system 1

The electric transport truck manufacturer reminds that the forklift should be lowered to the lowest position and the power supply should be disconnected after the work is completed The engine problem of diesel forklifts, whether it is an imported engine or a domestic engine, is the core part of the forklift's performance, and there are many brands to choose from, which requires careful comparison and analysis; and diesel forklifts also need to consider whether the exhaust pipe blows to the ground or to the sky 2

When performing fill welding, it is recommended to use DC reverse polarity arc welding

When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use

How many hours is the best time to charge the battery of BYD Logistics Company's electric forklift?-

Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc

Start Please follow the following sequence, otherwise the forklift will not operate: (1) Make sure the power socket is firmly plugged in

2 Hangcha Group, a leading domestic private forklift company, also launched electric forklift products at almost the same time

Check whether all standard parts are tightened

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

Do not start the forklift before the battery is fully charged After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg Introduction With the rapid development of the intelligent logistics and warehousing industry, the solutions for intelligent three-dimensional warehousing are constantly being updated and upgraded towards high storage capacity, high storage efficiency and low cost

In addition, due to the factory's daily expenses, personnel costs, equipment losses, etc

How many hours is the best time to charge the battery of BYD Logistics Company's electric forklift?-

Next, check whether the connection between the fork and the body of the electric pallet truck is damaged or has any welding cracks

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

, Ltd

The double forks should be inserted in parallel, and the pallet should not be distorted for operation

When turning left, the vehicle turns left; when turning right, the vehicle turns right

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

The following BYD forklift editor will introduce it step by step

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

(4) Hydraulic distribution valve, which consists of a valve body, a lifting hydraulic cylinder valve core, a tilting hydraulic cylinder valve core and a safety valve

According to WITS (World Industrial Truck Statistics), in 2020, electric forklift sales accounted for 87% of the European forklift market, 69% of the US electric forklifts, and the global average was over 60% Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info