蜜桃视频在线一区,亚洲午夜小视频,久久久一本精品

BYD tractor maintenance and operation process video-

Do not adjust parts during the operation of the equipment

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

Check whether there is any fault in the drive motor system Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected Types of forklifts The World Industrial Truck Society (WITS) divides forklifts into four categories and conducts statistics based on power type, working environment, operator position, and equipment attributes

We are a manufacturing company that develops and manufactures equipment handling products

?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency

We need to add a proper amount of lubricating oil to the joints of the various parts of the electric pallet truck and tighten the loose fasteners

Flexible configuration of the forklift for subsequent use

Good performance: For customers, the accessories of electric transport trucks are a key part

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

0 to 52

How to maintain and repair BYD forklifts? Daily maintenance is mainly about cleaning the forklift and external inspection

BYD tractor maintenance and operation process video-

For high lift, visual secondary positioning is added, and accurate picking and placing of goods can be achieved in a closed environment by binding the fork teeth and the shelf, effectively solving the errors caused by deformation of vehicles and shelves after many years

When the truck starts, make sure there is no one nearby and no obstacles or potholes on the road

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

Forklift drivers become the busiest front-line workers At the same time, users are encouraged to install safety monitoring devices on forklifts in use in accordance with the requirements of the new version of the regulations to improve safety As we all know, electric transport trucks and pallets are used together 2

Battery forklifts are mostly used in indoor places such as warehouses, where the environment changes little, and the corrosion caused by environmental factors is relatively light

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain Due to its zero pollution and low noise, it is widely used in indoor operations and other industries with high environmental requirements

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

It is recommended to use them outdoors

It is also easier to use

Full Chinese display surface: The technologically advanced Chinese display surface on the screen can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and the intelligent system can provide accurate real-time information for operation and maintenance personnel, maintaining personalized operation effects

BYD tractor maintenance and operation process video- Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

The rapid development of the logistics industry requires a forklift with short charging time, long use time, stable performance, ability to withstand high-intensity operations, and high degree of automation and intelligence

The steering wheel is designed with a floating structure Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

Their application in the forklift industry will definitely have a strong impact on the original forklift market structure

It is reported that Zhengzhou Jiachen is a professional enterprise that conducts research and development, design, production and manufacturing of new energy vehicle control systems and related products Next, check whether the connection between the fork and the body of the electric pallet truck is damaged or has any welding cracks First, the altitude of the electric forklift workplace should not exceed 1200m

Among them, the lifting height is detected by a pull rope encoder

Usually pay attention to the following points: 1

It manifests itself as sediment in the electrolyte, and brown material will rise from the bottom of the electrolyte during charging

Internal combustion forklifts are large and cumbersome to operate

Check the appearance

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

The above are two common problems with the plates of all-electric transporter batteries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info