www.51av欧美视频,中文字幕中文字幕一区二区,亚洲一二三区视频

BYD cold storage forklift manufacturer phone number-

's industrial vehicle intelligent terminal and vehicle management system are all key component technologies in electric forklifts

Two driving modes of electric forklifts: 1

To replace the drive wheel, first remove the motor wires, then remove the wheel fixing bolts and tap them out gently with a hammer

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

If it is higher than the standard value, it indicates that the charging voltage is too high

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

Among them, the lifting height is detected by a pull rope encoder Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

Trucks are used to control the driving speed and maintain the distance between vehicles to avoid extending the emergency braking interval longer than normal, about twice as long as in cold seasons

Internal combustion: Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

The entire freight process can be completed by one person, which has replaced manual transport trucks to a certain extent

At the same time, manufacturers are encouraged to actively promote product upgrades and install safety monitoring devices in advance

At the same time, in order to enhance the driver's sense of security during use, guardrails, intelligent recognition functions of pedal positions and three-speed design protection are specially installed to improve driving safety from multiple dimensions

BYD cold storage forklift manufacturer phone number- The operation and control of electric forklifts are relatively simple and flexible If the DC contactor of the equipment is insensitive, replace it in time

The first is three-dimensional warehousing based on rail stackers, which is mainly used in scenarios with long aisles and high shelves

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

Explosion-proof pallet trucks are generally used in some dangerous places with very high safety requirements, such as factories with a lot of dust, gas stations, gas stations, and chemical industries, or in the workshops of some electronics factories that are very sensitive to electronic interference

If the battery is not used for a long time, it should be recharged in time

Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

7 In short, the development history of forklifts reflects the economic development curve

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

The AC drive motor provides stronger power and continues to run under full load

BYD cold storage forklift manufacturer phone number-

The speed should be reduced in narrow passages or curved roads

In addition, the quality of the electric truck's motor, battery and other important parts also determines its price

You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you

4 stop precision When the AGV reaches the target address and is ready to automatically cut, the error value (mm) between the actual position and the position set by the program

It is particularly suitable for applications such as logistics operations, retail, food distribution and terminal loading and unloading that require increased productivity in transporting and storing palletized loads When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

Electric transport truck manufacturers remind that nine-legged or Sichuan-shaped pallets should be used, and double-sided Tian-shaped pallets cannot be used

PU polyurethane wheel: iron core coated with rubber, quiet, good wear resistance, not easy to damage the ground, suitable for painted floors

Large capacity battery, long working time

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

As the name suggests, an electric transport truck is a forklift that is powered by electricity

The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info