国产精品天天看天天狠,国产精品羞羞答答在线观看,亚洲www.

BYD forklift electric stacker charging process picture- Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment Cause: Charger failure, electrical circuit failure, etc

The first reason is that the battery plates are oxidized

The emergence of lithium battery forklifts is a general trend

Electric pallet trucks are suitable for heavy loads and long-term cargo transfers, which can greatly improve cargo handling efficiency

BYD forklifts still perform well in cold chain logistics and have huge room for market expansion In today's warehouses, four- or five-meter-high through-type shelves are a common configuration

Counterbalanced Forklift AGV As human resource costs continue to rise, more and more factories have established their own automated production lines

High efficiency and energy saving: it has great advantages over similar products; 2 2 Braking (1) When the operating arm moves to the uppermost or lowermost end, the forklift is electrically braked

If the vehicle has a braking function, the kinetic energy during deceleration can be recovered

Since lithium batteries use non-aqueous electrolyte solutions, there is no need to check and add electrolytes

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

BYD forklift electric stacker charging process picture- For example, in the logistics of pharmaceutical products, pharmaceutical logistics warehousing has the characteristics of high environmental requirements, high distribution frequency, and timely distribution Electric pallet trucks have the advantages of energy saving, no exhaust emissions, and low noise The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

Among them, the minimum stacking channel width refers to the minimum channel width corresponding to the forklift when it can stack in the shelf channel

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

The process holes or functional holes exposed on the body should also be plugged with waterproof plugs

Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc

The electric forklift manufacturer told the company that the width of the shelf must be carefully calculated and the safety issue should not be underestimated

Intelligent three-dimensional warehousing solutions currently include three main categories

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

The rated center distance refers to the horizontal distance from the center of gravity to the vertical forearm of the fork when a standard weight of cargo is placed on the fork of the electric forklift

The certificate holder shall submit a review application to the issuing department three months before the expiration of the review period

BYD forklift electric stacker charging process picture-

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance

Therefore, it requires the joint attention of the entire forklift manufacturing companies, sales companies, leasing companies, maintenance companies, and spare parts facilities companies

During operation, the amount and weight of the operation must be controlled according to the correct operating specifications and operating sequence

If an accident happens, the consequences will be disastrous

The body design of the electric transport truck is suitable for the workplace and has a good service life

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

It is a transformation of new technology and structure, which requires sufficient technical reserves and experience accumulation to achieve

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures

Many customers and friends are also puzzled

The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials

The editor of new energy electric vehicles will explain its advantages to you

There are many details about the use of electric transport trucks

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info