久久365资源,久久精品国产999大香线蕉,a'aaa级片在线观看

BYD Cold Storage Forklift Operation Procedures- Since fuel is easy to refuel, they can achieve long-term continuous operation and are capable of working in harsh environments

1 times to 0

Solution Design 1

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

The indoor use of the vehicle is very important

What is a forklift? Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

How to operate a new electric transporter How to use an electric transporter is not difficult, practice makes perfect

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection The ultra-low temperature characteristics are significantly better than lead-acid batteries, and lithium batteries are more suitable for use in northern areas or frozen storages; 6

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

BYD Cold Storage Forklift Operation Procedures-

I have seen no less than 50 configurations

It does not mean that electric pallet trucks have the advantage of being easy to operate and can be directly operated after purchase

Clean the gear box and change the gear oil

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

Comprehensive comparison and purchase As a relatively expensive industrial vehicle, when purchasing a forklift, compare the performance and price of as many products as possible to choose the product with the best cost performance

It has high storage efficiency, strong scenario applicability and moderate cost

In logistics, warehouses, factories and other places, transport trucks are needed to transport goods

The following is shared by BYD Forklift Editor: 1

The high-quality electronic control system is easy to use and can be controlled easily

Before moving the forklift, you must check whether the brakes and batteries are fully charged

7MPa) to drive the lifting hydraulic cylinder and the tilting hydraulic cylinder

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

Common parameters of explosion-proof electric forklifts 1

When driving outdoors, the speed should not exceed 10km/h

BYD Cold Storage Forklift Operation Procedures-

After purchasing an electric pallet truck, companies must provide systematic safety training for drivers

The fifth step is to slowly lift the fork

Anti-rust and anti-corrosion measures The temperature difference between inside and outside of the cold storage will cause the forklift to "sweat" after leaving the cold storage

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety

It is better to reduce it early than late

The operation using pallets is efficient, safe and stable, so it has now been widely used in production, transportation, warehousing and other fields

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

We are a manufacturing company that develops and manufactures equipment handling products

The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation

Hydraulic pallet trucks reduce labor intensity and improve working conditions

Repeated operation experience is required to achieve proficiency, accuracy and safety

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button

This product breaks through the concept of traditional battery forklifts, combines the advantages of internal combustion forklifts and electric forklifts, has a low center of gravity, compact structure, comfortable driving, green and environmentally friendly, can be flexibly operated in a small space, and its main performance indicators have reached the international advanced level

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info