成人免费网站观看,视频一区欧美精品,高清在线视频不卡

BYD high-lift forklift operation video- before working, and then operate after confirming that it can operate normally

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

5-5 tons, including counterbalance and three-point

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

The body design of the electric transport truck is suitable for the workplace and has a good service life

The unmanned forklift moves to the loading point by moving straight, sideways, turning, etc

Turn on the emergency power off switch

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

The specifications of the forks are designed according to the maximum load of the forklift

Finally, let me introduce you to the mast inclination angle

Check the reversing buzzer and hazard warning lights; 7

There were very few distinctive products

BYD high-lift forklift operation video- At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

It is understood that in the 5th "China Industrial Vehicle Innovation Award" (CITIA) (Parts, Management and Services Category) review activity initiated and organized by the Industrial Vehicle Branch of the China Construction Machinery Industry Association in 2019, Hangzhou Hangcha Axle Box Co

Consider the issue of pneumatic tires and solid tires

Regardless of the brand of the electric forklift, learning this maintenance knowledge is not only beneficial to protecting the safety of the goods, but also beneficial to the long-term and stable use of the electric forklift, allowing the electric forklift to maintain a good condition even during high-intensity work and extend the service life of the forklift

Through the accumulation of recent years, the product series has gradually become richer and richer, the technical level has continued to improve, and the products have been sold all over the world, promoting a new trend in the industry

Prevent such accidents from happening again! 1

Forklifts are very popular in the warehousing industry

Electric forklift It uses electric motor as power and battery as energy

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

However, the electric hydraulic transporter must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

BYD high-lift forklift operation video-

Electric pallet trucks are powered by electricity, which saves manpower, is more efficient, is not difficult to operate, and is pollution-free, low-noise, and very safe to use

3 Forklifts are special equipment used in industrial and logistics warehouses

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

Be careful! Unauthorized driving is not allowed

The rapid development of the logistics industry requires forklifts with short charging time, long service time, stable performance, high-intensity operation, and high degree of automation and intelligence

Moreover, Chongqing's economy is developing faster and faster, and the industry is becoming more and more mechanized, simplifying the work process, reducing work obstacles, and improving the working environment, making electric forklifts popular The plate is a very important part of the battery Regardless of the type or model of electric pallet truck, there are always some signs before serious problems occur Buyers can use this data to judge whether an electric forklift is sensitive

In 2021, China's forklift sales reached 1

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

The forks of the electric pallet truck are lowered to approach the cargo

As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages

, Ltd

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info