亚洲综合国产激情另类一区,91麻豆产精品久久久久久,欧美精品欧美精品

BYD Special Forklift Supplier-

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life Keywords: side stacking, unmanned forklift, hydraulic synchronization 1

Overhead guards and shelf guards must be complete and effective

You can consult the electric forklift manufacturer for details

5 ton electric forklift, 3 ton electric forklift, three-point counterbalanced electric forklift, four-point counterbalanced electric forklift, etc

The advantages of zero emissions, long battery life, fast hydrogen refueling, and low noise have attracted the attention of forklift manufacturers

are important but easy to understand, so I won’t go into details here

The battery is the power source of the vehicle and should be charged in time and maintained frequently

It is not allowed to operate with a single fork; 4

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

BYD Special Forklift Supplier- Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure It can be used immediately after charging, eliminating the time and safety risks of replacing batteries

The speed should be reduced in narrow passages or curved roads

Use the DC voltage range of the multimeter to measure the voltage across the battery

Electric forklift manufacturers tell you that the smaller the minimum turning radius, the more flexible the electric forklift is

The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

The vehicle structure is rationally laid out, greatly shortening the turning radius of the vehicle and increasing the actual utilization rate of the warehouse

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

At present, many domestic forklift host companies have begun to consciously carry out product series work

The electric transport truck manufacturer is a long-established comprehensive manufacturer with small profits but quick turnover and perfect services It can transform static cargo into dynamic cargo and is a kind of movable "ground"

Of course, some basic models will account for the majority of sales, but other special models will also develop well in the market segments

BYD Special Forklift Supplier-

At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

In addition, it takes effort to choose a high-quality electric hydraulic transporter

A professional forklift operator must also have some professional professional qualities to cope with the handling work of warehousing, otherwise it is easy to cause accidents

The weld height should not exceed 1-2mm above the substrate plane

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high Driving direction and speed control Turn the switch on the handle head to control the driving direction, through which the speed and acceleration can be adjusted

Advantages and disadvantages of electric transport trucks and manual transport trucks Advantages: Electric transport trucks are electrically driven, and all operations are based on handles, which can be easily mastered

Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

Check the lifting chain to see if there are any cracks or damage

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

The battery fluid should be supplemented with distilled water in time

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

In today's warehouses, four- or five-meter-high through-type shelves are a common configuration

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

亚洲国产精品高清久久久_av美女网站_日韩网站在线_一区二区三区精品视频在线观看 _精品亚洲永久免费精品_日日噜噜噜夜夜爽爽狠狠 _精品国产乱码久久久久久天美

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info