久久激情av,9999热视频在线观看,青青青国内视频在线观看软件

BYD Ride-On Forklift Maintenance Information -

Forklift wheel material: Electric forklifts mainly use wheels made of PU polyurethane and rubber

Safety of lithium battery forklifts The DC motor and hydraulic motor drive the lifting of the fork, pushing the cylinder up and down to lift the fork and goods The market demand for cold storage forklifts is huge

It can be divided into electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

Of course, other forklift manufacturers could not sit still as their small electric forklifts sold so well, and quickly launched their own brands of small electric forklifts

In addition, no one is allowed to stand on the forklift

Check the handbrake and footbrake; 3

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

When using electric forklifts in winter, the most important thing to pay attention to is battery maintenance

5 tons/2 tons/2

Check the appearance

BYD Ride-On Forklift Maintenance Information -

The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

If you want to enter this industry, you need to improve some technical shortcomings, such as battery consistency, power supply intelligent management system matching, etc

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving

In contrast, BYD Forklift, which started to enter the electric forklift field as early as ten years ago, should not be underestimated in its deep layout in the industry When maintaining an explosion-proof electric forklift, you should follow strict maintenance regulations, use the correct lubricating oil, and check each component of the forklift to ensure the safe and reliable operation of the equipment Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force8T, 2T, 2

Disadvantages: Manual transport trucks rely on human power to pull, which consumes manpower, requires effort when the ground is uneven, and has low transport efficiency

Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

BYD Ride-On Forklift Maintenance Information -

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

Before continuing to operate, the direction selection switch must be restored to the middle position

Before this, many electric pallet truck buyers came to find out the cause of the electric pallet truck failure

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

Precautions after using electric forklift in warehouse: 1

The lifting, lowering and turning of the forklift are driven by the hydraulic system

They are made of polyethylene, formed in one go, stable and durable

The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation

When welding, the electrode should be inclined 20°-30° in the direction of movement

The price of fully electric equipment is generally higher than that of semi-electric equipment

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

Reduce the damage of transported items and improve the success rate of products

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info