欧美一区二区免费,亚洲欧美日韩国产,日韩pacopacomama

BYD Lithium Battery Forklift Operation Manual - The push rod under the fork can be electrically adjusted to control the lowering height of the fork

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

Overloading is not allowed; 5

In addition, iron batteries can be fast-charged in 1 hour and can be used at any time without affecting the battery cycle

The combination of 5G and AGV forklifts constitutes a cloud forklift, which promotes the automation and intelligent construction of logistics warehousing They are all widely used in various industries

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

Prototype test plan The prototype test plan needs to test the unmanned forklift body performance from five aspects: basic body performance, load capacity, lifting capacity detection, high side fork detection, and fork deflection detection

When turning the electric pallet truck, pay attention to whether the operation is smooth, whether there is any abnormal sound, whether lubrication is needed, etc

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage

Its maintenance should depend on what type of battery the electric transport truck uses Diesel forklift: 0 Except for some companies, the overall technical strength of domestic lithium battery forklifts is not high at present

BYD Lithium Battery Forklift Operation Manual - Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork

As an important part of cold chain logistics, forklifts are widely used in cold storage, and their market demand is also growing rapidly

Electric forklifts are mainly used for self-handling and stacking operations in warehouses

Therefore, it is very necessary to check and deal with these minor problems

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency For example, in the logistics of pharmaceutical products, pharmaceutical logistics warehousing has the characteristics of high environmental requirements, high delivery frequency, and immediate delivery requirements

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

The operation is simple, safe and reliable

The handle design conforms to the principles of ergonomics

Zhongli also successfully became one of the world's leading storage truck manufacturers

Its working principle is to convert chemical energy into electrical energy

BYD Lithium Battery Forklift Operation Manual - In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

They are relatively hard and have low resistance, making them suitable for uneven surfaces

Electric forklift technology has gradually matured, and the domestic electric forklift industry has great development potential If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Electric forklift manufacturers recommend that companies choose electric forklifts with the same load capacity that have a smaller tire outer diameter

Electric forklift: 0

In addition, companies such as Noli, Ningbo Ruyi, Zhejiang Zhongli, Liugong, Himac, and Jixinxiang have also made achievements in the research and development of electric forklift products and achieved good market performance

When driving outdoors, the speed should not exceed 10km/h If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving Where can I find an electric transport truck agent or electric pallet truck wholesaler? With the increasing demand for electric transport trucks, manufacturers, wholesalers, retailers, etc They are highly efficient and save time

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info