国产精品色网,日韩av首页,精品久久久久久无

What are the contents of BYD AGV forklift first-level maintenance?-

Nowadays, electric pallet trucks produced by electric transport truck manufacturers have become very common handling equipment in factories and warehouses

's industrial vehicle intelligent terminal and vehicle management system are all key component technologies in electric forklifts

Slow down before starting, slow down for a few seconds and then speed up; 5

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

The soft brush should roll freely in the hand box

Let's take a look at the lifting situation first

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

Use the DC voltage range of the multimeter to measure the voltage across the battery

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

(3) Release the operating arm and it will automatically return to the parking brake position

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

When choosing, we must understand the approximate price range of the equipment Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards One is screw connection, which is relatively simple

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

What are the contents of BYD AGV forklift first-level maintenance?-

A pallet truck is a type of warehousing logistics equipment used for cargo handling

The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation

Forklift maintenance Forklift battery cannot be charged The reason why the forklift battery cannot be charged may be that the connector is not connected properly, so we just need to connect it firmly

If the vehicle has a braking function, the kinetic energy during deceleration can be recovered

It is not very cost-effective

They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different Overview Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

It is understood that in the 5th "China Industrial Vehicle Innovation Award" (CITIA) (Parts, Management and Services Category) review activity initiated and organized by the Industrial Vehicle Branch of the China Construction Machinery Industry Association in 2019, Hangzhou Hangcha Axle Box Co

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

However, there are also some key points that need to be paid attention to during operation

Indeed, the openness of hardware configuration is almost the same as the opening up of the entire Apollo ecology

Circuit system 1

Check the reversing lights; 6

What are the contents of BYD AGV forklift first-level maintenance?-

At the same time, the product replacement cycle has been significantly shortened

It also reduces the huge workload caused by labor costs

Specific performance parameters of AGV

Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4 8

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

If the driver does not understand, he can consult the electric transporter manufacturer

The forklifts can adapt to the on-site environment through autonomous learning, automatically build maps, and plan appropriate routes to achieve flexible scheduling during the transportation process

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info