国产一级揄自揄精品视频,久久性色av,亚洲性受xxx喷奶水

BYD Ride-On Electric Forklift Maintenance-

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

Novices should not operate a forklift alone, otherwise it is easy to cause safety accidents

The third type of vehicle is actually electric moving, which is mainly divided into electric pallet trucks and electric pallet stackers

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

It is not allowed to unload goods by picking, pushing or bumping the pallet with a fork; 10

Small forklifts are not expensive, so most warehouse workshops are equipped with one or two small forklifts

The operation using pallets is efficient, safe and stable, so it has now been widely used in production, transportation, warehousing and other fields

The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

The operation and control of electric forklifts are relatively simple and flexible

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

The soft brush should roll freely in the hand box

For example, the height of the warehouse door should be higher than the height of the entire forklift; after the goods are lifted to a certain height, what is the actual rated load of the electric forklift; consider how much weight each square meter of the floor can bear; it is also necessary to consider the road surface Transportation and storage This all-electric stacker must be placed in a horizontal position during transportation and storage to prevent oil spillage At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

BYD Ride-On Electric Forklift Maintenance-

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

Wide applicability: It can be used for various purposes such as logistics distribution centers, warehousing stackers, material transfer yards, etc

For three-dimensional storage based on unmanned forklifts, the safety inspection is mainly considered from two aspects: the vehicle body itself and the loading device connected to the vehicle body

Many companies will face a difficult choice when purchasing

At lower temperatures, higher relative humidity is allowed

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

Flexible configuration of the forklift for subsequent use 2

The forks of the electric pallet truck are lowered to approach the cargo

How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling

Therefore, work efficiency becomes higher and accuracy is greatly improved The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

SH), Robot (300024

BYD Ride-On Electric Forklift Maintenance-

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

Flexible configuration of the forklift for subsequent use

From raw materials, to lithium batteries, module structure, to the overall manufacturing process, and final marketing, it can be said that BYD enjoys its own competitive advantage in every step

Check the lifting, driving and hydraulic pump carbonization

Long service life

This is our current electric pallet truck Huge market segment space In the field of electric forklifts, the rapid growth and technological innovation of domestic electric walk-behind warehouse trucks have also been eye-catching, and have become an important "engine" driving the rapid growth of my country's forklift industry in recent years

The DC motor, therefore, the frequency characteristics of the motor will be reduced

Safety of lithium battery forklifts

Most warehouse forklifts can be raised to complete the transportation work at the height of the space

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info