精品国产乱码久久久久久图片,精品三级国产,久久99精品国产自在现线

BYD Pallet Handling Forklift Operating Procedures-

Terms such as rated load, maximum lifting height, channel width, etc

Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly

(5) Choose the correct driving direction and control the speed at an ideal level

During the unloading process, rapid descent and unloading are strictly prohibited; 12

For a battery forklift, the first thing to consider is whether to choose a DC motor or an AC motor

AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation

75 times, the motor can work normally

China, as the world's most populous country, has a very low per capita cold storage area, and there is still huge potential for cold storage development (at a rate of more than 35%)

At the same time, Gongyan Industry Research Institute also provides industry data, industry research, policy research, industry chain consulting, industry maps, industry planning, feasibility analysis, business plans, IPO consulting and other products and solutions

The larger the load, the more expensive it is

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

5-5

Manipulator arm During driving, the electric pallet truck is controlled by the manipulator arm to travel and turn, and the maximum turning angle of the manipulator arm is about 180 degrees

BYD Pallet Handling Forklift Operating Procedures-

Introduction With the rapid development of the intelligent logistics and warehousing industry, the solutions for intelligent three-dimensional warehousing are constantly being updated and upgraded towards high storage capacity, high storage efficiency and low cost

Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

It can be seen that forklifts have their own unique advantages

When vehicles enter and exit containers to load and unload goods, they should slow down, pay attention to the entry and exit height, and do not let the goods hit the roof to avoid damage to the goods

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

The electric transport truck manufacturer is a manufacturer with many years of experience in the production and research and development of electric transport trucks, so the quality of the batteries is naturally guaranteed

Hyster has added a new stand-on electric pallet truck, the S2

The overall structure should take into account the accumulation of anti-corrosion media

In addition, there are also types such as hydraulic transporters and micro-diamond transporters Since it involves indoor and outdoor operations, the two configuration ratios are considered 011

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area This idea is too one-sided

BYD Pallet Handling Forklift Operating Procedures-

They are simple and flexible to operate, can quickly lift goods, are highly efficient, and have low noise, no pollution, and require daily maintenance

Forklifts can be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

Forklift maintenance Forklift battery cannot be charged The reason why the forklift battery cannot be charged may be that the connector is not connected properly, so we just need to connect it firmly

Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6 The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

No speeding is allowed

5-5 tons, including counterbalance and three-point

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info