日韩国产在线一,一区二区三区欧美视频,亚洲精品日本

How to move the BYD warehouse truck when it runs out of power?-

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

There are several reasons for this phenomenon, usually three

The shedding of active material on the positive plate is a common problem on all-electric truck batteries, which can cause a short circuit in severe cases

The manual trucks produced by electric truck manufacturers also have these special advantages: thickened high-carbon steel plates have stronger load-bearing capacity and longer life; upgraded rubber-coated handles make operation more comfortable and labor-saving; high-quality casters are used, which are quiet and wear-resistant; and automatically welded forks are not easy to deform and are stronger

With more than 10 years of industry experience, continuous development for various electric applications, and innovative scientific and technological achievements, we are committed to designing, developing and producing customized power transmission solutions for our partners

?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency

With the increase in participants, the market competition for this type of product will become more intense in the future

Key switch The function of this switch is to control the connection and disconnection of the circuit

3 The soft brush should roll freely in the hand box

They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance

Parking (1) Release the direction select switch

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58

How to move the BYD warehouse truck when it runs out of power?- The company has more than 10 years of experience in the research and development and manufacturing of standard electric warehouse forklifts It is an indispensable equipment in logistics and transportation Do not turn it violently or accelerate suddenly

The rapid development of the logistics industry requires a forklift with short charging time, long use time, stable performance, ability to withstand high-intensity operations, and high degree of automation and intelligence

Novices should not operate a forklift alone, otherwise it is easy to cause safety accidents

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

BYD forklifts still have outstanding performance in cold chain logistics and have huge market development space There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing, aiming to achieve strategic synergy and complementarity in the fields of high-end transmission systems such as electric and new energy, and further enhance its core competitiveness in the fields of complete machines and key components

Starting, stopping or changing movement should be slow, as sudden movement may cause danger

Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

How to move the BYD warehouse truck when it runs out of power?-

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible

It is also designed to improve operator efficiency, with a new tiller head with different driving modes to choose from, and a side arm design to make it quicker to move to the desired location

It is more efficient to use and can save both time and effort

5 tons/3 tons/5 tons Forklift height and safety 1

The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

, Linde (China), and Lonking Fuel forklifts have sufficient horsepower and great strength, but they are noisy and produce high exhaust pollution during use The regulations are also very high

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

In AC, you also need to distinguish between full AC and partial AC, because this involves the issue of subsequent maintenance costs

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info