亚洲欧美综合图区,欧美一二三视频,黄色视屏在线免费观看

Where is the professional maintenance point for BYD forward electric forklift?- After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

After lifting the goods, it is strictly forbidden to stand under the fork; 8

6 meters

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

Make sure to check your surroundings and drive slowly when turning; 2

Lithium batteries are a type of battery that uses lithium or lithium alloys as negative electrode materials and non-aqueous electrolyte solutions Don’t easily believe a salesperson’s opinion

Hydraulic pallet trucks reduce labor intensity and improve working conditions

At present, many domestic forklift host companies have begun to consciously carry out product series work In fact, most of the reasons here are man-made

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

Where is the professional maintenance point for BYD forward electric forklift?- Forklift height and safety 1 BYD forklifts still have outstanding performance in cold chain logistics and have huge market development space

Electric forklift manufacturers tell you that the smaller the minimum turning radius, the more flexible the electric forklift is

The market demand for cold storage forklifts is huge

There are three operating modes: walking, standing and riding

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

It effectively improves the work efficiency of manual labor, uses batteries for operation, and is environmentally friendly and pollution-free

The technical director also put forward a similar view Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

The load center distance of the electric forklift of the electric forklift manufacturer is 500mm

Where is the professional maintenance point for BYD forward electric forklift?-

From the current situation, the most popular new energy technology is still mainly based on electric forklift technology

8T, 2T, 2

The electrical parts and connectors must be arranged inside, and protective covers can also be added

Do you think this kind of micro-innovation is difficult? And it must be developed when there is market demand

Overloading or partial loading of goods is strictly prohibited

Fault 2: Sliding down when loaded When an electric transport truck slides down while loading, it is usually due to oil leakage in the oil pipeline or oil joints

As the most important handling tool, forklifts will be subjected to the most demanding operation tests

The following electric forklift manufacturers analyze the advantages and disadvantages of manual pallet trucks and electric hydraulic trucks: 1

When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

The fully electric transporter is also called an electric pallet truck, an electric pallet transporter, or an electric hydraulic pallet truck

Generally, it is one year or 1,000 hours (whichever comes first)

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

■ Easier to operate Equipped with multi-disc parking and service brakes, the machine has better maneuverability

亚洲国产精品高清久久久_av美女网站_日韩网站在线_一区二区三区精品视频在线观看 _精品亚洲永久免费精品_日日噜噜噜夜夜爽爽狠狠 _精品国产乱码久久久久久天美

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info