bl在线肉h视频大尺度,欧美少妇性性性,中文字幕亚洲图片

BYD explosion-proof battery forklift usage specifications- The forklift is driven by a hydraulic system for walking, lifting, lowering and turning Electric transport trucks can be said to be indispensable equipment in warehousing and transportation In addition, intelligent robots have begun to enter people's lives, and many companies have begun to use unmanned forklifts to replace manual labor

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

before working, and then operate after confirming that it can operate normally

(5) Choose the correct driving direction and control the speed at an ideal level

The specific size and load range still need to be determined by the company according to its own needs and the model of the electric transport truck

The operation is simple and flexible

? High-quality hydraulic pump station with buffer, low noise, small vibration, good sealing, smooth and reliable lifting and lowering

Therefore, it is easy to make mistakes when you have to twist your neck to check the reversing road conditions If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified

The oil pump is excessively worn, causing internal leakage of the equipment, and needs to be replaced

4 Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

Low maintenance cost: 1-year warranty for the whole vehicle, free repair within 1 year, and replacement with a new vehicle within 3 months; 8

BYD explosion-proof battery forklift usage specifications-

The specific size and load range still need to be determined by the company according to its own needs and the model of the electric transport truck

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

First of all, we must find out the cause of the abnormal noise

After stopping using the electric pallet truck, turn off the key switch and remove the key

We are committed to providing the market with AGVs, AGV bodies and solutions with independent innovative brands and high cost performance, and providing customers with intelligent, convenient and high-quality products

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

The safety distance is generally 200mm

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

The load capacity is 1

A pallet truck is a type of warehousing logistics equipment used for cargo handling

BYD explosion-proof battery forklift usage specifications- Electric forklift manufacturers remind that if the center of gravity of the goods shifts during the forklift process, don't worry, just adjust it in time

Electric pallet trucks can be divided into two categories: semi-electric transport trucks and full-electric transport trucks

Electric Pallet Trucks Drive and Operation start 1

The forklift high-position display can easily solve the problem of fork lifting and lowering, making forklifting no longer so uncomfortable! The forklift forklift picture is displayed on the display, and the forklift is ready to enter the pallet correctly, reducing the risk of accidents! With driving record function, it supports up to 128G storage space, which can record the work content of forklifts to prevent disputes caused by accidents and make work easier; Wireless strong magnetic adsorption, easy installation The simple installation method is the strength of this product

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

Automation level of electric trucks and manual trucks Electric transport trucks are mainly used to transport goods quickly

The speed limit when carrying goods in the warehouse is 5KM/h

Electric forklifts have become a more practical factory transportation equipment at present

If an internal leakage occurs, we need to inspect and replace the leaking part The lifting height of the forklift

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

The application scenario guarantees the confidence of the product

Therefore, the competition among manufacturers in the current market is also fierce

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info