天堂成人免费av电影一区,青草青在线视频,精品麻豆av

BYD new energy forklift manufacturer which is better-

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

The operation is simple and flexible

Due to the differences in the level of scientific and technological strength of various countries, there are also great differences in the application of new energy in forklifts

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

So before purchasing a forklift, we need to understand what we are going to use the forklift for The hydraulic pump station at the entrance makes the cargo lifting smooth and powerful

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

They use batteries as the power source to drive the travel motor and the hydraulic system motor to complete travel and loading and unloading operations

Most of the imported electric pallet trucks have been equipped with power steering systems

The forks can be tilted forward and backward following the hydraulic cylinder

Forklift

The use of explosion-proof equipment can effectively prevent the forklift from dangerous situations such as fire and explosion in an explosion-proof environment

BYD new energy forklift manufacturer which is better-

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation

It became the first handling equipment in China to win the German "Red Dot Award", opening a new era of easy handling

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

0 to 6

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

When turning left, the vehicle turns left; when turning right, the vehicle turns right

Advantages: Manual trucks are pulled by hand and operated with handles, which is extremely simple, flexible, light in weight, energy-saving and environmentally friendly, and have excellent performance

Consider the needs of the standard forklift first

The new stand-on electric pallet truck S2

Otherwise, it is very easy to cause safety accidents during subsequent use

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet

When starting the forklift, maintain a moderate starting speed and do not start too hard

When the gantry is retracted, the width of the operating channel is generally 2

BYD new energy forklift manufacturer which is better-

The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

Pallet trucks are common logistics and warehousing equipment on the market

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000 Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

before working, and then operate after confirming that it can operate normally

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics

0 tons, and the width of the working channel is generally 3

When choosing, we must understand the approximate price range of the equipment The annual output of electric forklifts in China exceeds 300,000 units From 2015 to 2019, the output of electric forklifts in China's forklift manufacturing industry increased year by year, from 122,000 units in 2015 to 293,200 units in 2019, with an average annual compound growth rate of about 25%

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

Check and adjust the brake system and add grease to the movable joints Electric forklifts store energy in batteries and work with electric drive

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info