精品少妇av,美女福利精品视频,欧美亚洲国产一区二区三区

What is the maintenance content of BYD dual-drive lithium-ion forklift?-

Hold the left and right handles of the control handle with both hands, press them down to the tilted position, and move the control handle left and right to steer the vehicle

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

What drivers need to learn and understand most now is the maintenance and care of electric transport trucks

Pay attention to the protection of exposed parts The cost is relatively low

It is used for container handling, such as container yards or port terminal operations

Moreover, when the vehicle is carrying goods, the mast should be tilted backward It has the advantages of small size, light weight, high efficiency and long life; 2 When starting the forklift, maintain a moderate starting speed and do not start too hard

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder

What is the maintenance content of BYD dual-drive lithium-ion forklift?-

Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement

Taking the lifting device as the research object, as shown in Figure 3-(a), it mainly includes a front lifting gantry 1, a rear lifting gantry 2 and a two-way telescopic fork 3

At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

It is understood that in the 5th "China Industrial Vehicle Innovation Award" (CITIA) (Parts, Management and Services Category) review activity initiated and organized by the Industrial Vehicle Branch of the China Construction Machinery Industry Association in 2019, Hangzhou Hangcha Axle Box Co

Increase the stacking height and improve the utilization rate of stacking space

The reach forklift among warehouse forklifts has a gantry that can move forward or retract as a whole

If you really encounter a problem, be sure to cut off the power before checking or repairing

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

Relatively speaking, battery forklifts are much less powerful than diesel forklifts

The truck is designed to be "Li-ion Ready" with its controller automatically identifying the battery chemistry (lithium-ion vs

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

What is the maintenance content of BYD dual-drive lithium-ion forklift?- Since the birth of forklift, it has gone through a hundred years of changes and now has taken the "C position", becoming an indispensable equipment in production and warehousing operations On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation (5) Readjustment of air gap: The rated air gap Z will increase due to wear Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

Combination of forklift and vision The combination of 5G unmanned intelligent forklifts and vision can be better applied to various working environments

From the current situation, the technical development direction of electric forklifts mainly includes the following aspects: (1) Lithium electrification Driven by multiple factors such as the acceleration of forklift electrification, the continuous decline in the price of power lithium batteries, and increasingly strict supervision of the lead-acid industry, the lithium electrification of forklifts has become an obvious trend in the development of the industry Then, we need to check whether the wheels of the truck are severely worn or loose With the development of the economy and the improvement of environmental protection requirements, electric forklifts have developed rapidly, and market sales have increased year by year

The DC motor must be configured

How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling 2

(CATL)

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info