亚洲福利视频网,午夜伦理在线视频,日本无删减在线

BYD Electric Reach Forklift Video Collection-

8 During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up Compared with traditional internal combustion forklifts, the engine + fuel + transmission system has become an electric motor + battery + electronic control system, which is mostly used for indoor operations

Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

Electric forklifts are mainly used for self-handling and stacking operations in warehouses

Electric truck manufacturers tell you that this is not only for the safety of the driver, but also to maintain the battery of the electric pallet truck and prevent shortening the battery life

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

It is a new technology application and structural conversion, which requires sufficient technical strength and accumulated work experience to complete Of course, other forklift manufacturers could not sit still as their small electric forklifts sold so well, and quickly launched their own brands of small electric forklifts

For example, lithium batteries may leak or even explode if used improperly

Wide applicability: It can be used for various purposes such as logistics distribution centers, warehousing stackers, material transfer yards, etc Do not start the forklift before the battery is fully charged Consider the needs of the standard forklift first

BYD Electric Reach Forklift Video Collection-

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

Do you think this kind of micro-innovation is difficult? And it must be developed when there is market demand

The lifting, lowering and turning of the forklift are driven by the hydraulic system

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

Good mobility, diversified working performance, reducing other loading and unloading equipment, reducing the investment of the entire handling facility

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded

The above are two common problems with the plates of all-electric transporter batteries

, which mainly engages in the research and development, manufacturing, sales, technical services and consulting of various electric vehicle motors; and jointly established ZF Heli Transmission Technology (Hefei) Co If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc 4

Forklift wheel installation: 1

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

BYD Electric Reach Forklift Video Collection-

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system Repeated operation experience is required to achieve proficiency, accuracy and safety Except for a few forklifts that are powered by manpower, the others are powered by electric motors

If the driver does not understand, he can consult the electric transporter manufacturer

After years of development, the engine technology is relatively complete and the domestic price is not high

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

Chain components 1

Check whether the synchronous motor rotates flexibly and whether there is false friction

Flexible control and precise positioning; 3 Below we will explain in detail the driving operation and steps of electric hydraulic transport trucks

It has the advantages of simple and flexible operation, fast lifting of goods, high efficiency, noise reduction and no pollution

In the daily maintenance process, we need to do a good job of maintaining various gaskets One common sign is abnormal noise

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info