色婷婷国产精品,亚洲一区二区三区免费观看,欧美人妖视频

BYD Pallet Truck Operation-

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

It can transform static cargo into dynamic cargo and is a kind of movable "ground" And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

The Spring Festival is coming soon, and the working intensity and workload of electric forklifts have greatly increased

Electric forklifts use lithium battery fast charging technology, so there is no need to worry about battery life issues

How to maintain and repair BYD forklifts? Daily maintenance is mainly about cleaning the forklift and external inspection

The air humidity reaches 100%, and essence is produced on the surface of the motor

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

The installation sequence is the opposite of the disassembly sequence

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

When starting the forklift, maintain a moderate starting speed and do not start too hard

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

SH), Robot (300024

It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production

BYD Pallet Truck Operation- The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced In a single set of gantry, the two lifting cylinders are connected through the inner gantry to achieve mechanical synchronization

Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged

The indoor use of the vehicle is very important After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

We must understand them clearly and make a good distinction when choosing

The rollers shall rotate flexibly and the rollers and shafts shall be free of cracks and defects

Electric forklifts are now very commonly used logistics and warehousing equipment

They are often used for transporting large objects in warehouses, usually powered by fuel engines or batteries, and some forklifts are manually hydraulically operated

Under normal circumstances, the life of lithium batteries is 3 to 5 times that of lead-acid batteries

Manual transport trucks mainly rely on manpower to push and pull goods, with a low degree of automation

The lifting, lowering and turning of the forklift are driven by the hydraulic system

Find out the warranty period for new vehicles

BYD Pallet Truck Operation-

Electric truck manufacturers tell us that the advantages of electric pallet trucks are actually very obvious, and they can be used in various occasions

Only personnel who are 18 years of age or older and have received special training can use this counterbalanced forklift

In addition, it takes effort to choose a high-quality electric hydraulic transporter

Electric hydraulic truck The electric hydraulic transporter manufactured by the electric forklift manufacturer is driven by electricity and operated by a handle

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

In recent years, the country's warehousing requirements for enterprises have become increasingly stringent

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

The sprocket should rotate flexibly

Moreover, when the vehicle is carrying goods, the mast should be tilted backward

AGV fully automatically and correctly guides transport vehicles

If the DC contactor of the equipment is insensitive, replace it in time

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info