久久亚区不卡日本,欧美日韩一区二区国产,二区三区不卡

BYD All Electric Forklift Company-

The most important thing when purchasing is to compare these factors that affect the price

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke There are four uniform magnetic fields on the seat (5) Readjustment of air gap: The rated air gap Z will increase due to wear We must strengthen the supervision of forklift operators

The shedding of active material on the positive plate is a common problem on all-electric truck batteries, which can cause a short circuit in severe cases

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground

For more detailed research and analysis of this industry, please see Gongyan The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Electric trucks save time, effort, energy, cost and efficient operation

Therefore, the tires of the reach forklift in the cold storage should be equipped with polyurethane tires with anti-skid sleeves to ensure that the forklift can fully exert its driving force and braking force on the frozen road surface

Secondly, when choosing batteries for electric transport trucks, we should beware of counterfeit products

With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

The AC drive motor provides stronger power and continues to run under full load

BYD All Electric Forklift Company- Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent However, for the above-mentioned forklifts equipped with safety monitoring devices, the regular (initial) inspection shall include the corresponding items The former is electrically controlled for driving and lifting, which is more labor-saving

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

The semi-electric forklift factory tells us that electric pallet stackers are divided into two types: full-electric pallet stackers and semi-electric pallet stackers

Avoid using in blind areas; 9

0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers

The following BYD forklift editor will introduce it step by step

Safety production education, You must drive with a license, and illegal operation is strictly prohibited

The latter requires manual pulling or pushing of the forklift, and the lifting is electric

The development process of lithium battery and new energy forklifts is basically consistent with the development history of the current internal combustion forklifts

The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1

BYD All Electric Forklift Company- Lead-acid batteries are heavy, large, and of low quality, especially the charging and discharging requirements are very strict Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

BYD forklift solutions for food grade stainless steel logistics and transportation: In the logistics industry, the food, pharmaceutical, and science industries have relatively high requirements for logistics equipment and work

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder

However, only the tutorial is useless

When operating a reach truck, try to use less long-term and long-distance acceleration

Hydraulic system 1

Therefore, AC motors require fewer components than DC motors, have no wearing parts that need to be replaced regularly, require almost no maintenance, are more efficient, and are more durable

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

03Three

They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info