竹内纱里奈兽皇系列在线观看,欧洲成人午夜免费大片,一本久道久久久

BYD New Energy Electric Forklift Operation Guide - The electrical parts and connectors must be arranged inside, and protective covers can also be added

The working driving principles are roughly the same, and accessories in the same brand series can be replaced, such as wheels

They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving BYD forklifts still perform well in cold chain logistics and have huge room for market expansion The advantages of easy operation, simplicity and high efficiency also make electric transport trucks quickly sell well in the market However, in modern society, hydraulic electric pallet forklift manufacturers are BYD, Jungheinrich, Heli, Hangcha, Ruyi, Noli, Xilin, Xilin, Noli, Cape, Jindun and other brands However, the electric hydraulic transporter must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

If any abnormal condition is found in the forklift, stop and check it immediately

In recent years, the country's warehousing requirements for enterprises have become increasingly stringent Moreover, it has no environmental pollution, is small in size, and is light in weight, making it the most widely used battery on the market

Electric transport trucks are powered by batteries, driven by DC motors, and lifted by hydraulic power units; they have the advantages of fast running speed, small size, simple and flexible operation, low noise, and no pollution

The forks can be tilted forward and backward following the hydraulic cylinder The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

BYD New Energy Electric Forklift Operation Guide - 10

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise

5 meters, and 6 meters; usually, several combinations are considered separately according to low-level operations and high-level operations to reduce the total procurement cost

The price is less than a quarter of Linde and half of Heli

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

The equipment is equipped with an intelligent operating handle, which can be electrically lifted and moved, saving time and effort

The second reason is that the density of the electrolyte is too high

It is also necessary to practice more in daily work and accumulate experience

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

When welding, the ambient temperature should be above 0℃

BYD New Energy Electric Forklift Operation Guide -

※ ACCIDENT ※ In emergency or dangerous situations ※ When welding Notice! When welding around the car body, the battery is easily damaged

Use both hands to push the control handle backward to between 0°-90°

3 When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

The lifting height of an electric truck is generally 200 mm, which is just enough to lift the pallet off the ground, keep a certain distance from the ground, and move freely

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

Manual forklift Manual forklifts are mainly designed for handling goods in warehouses

In addition, the quality of the electric truck's motor, battery and other important parts also determines its price

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

They are suitable for use in warehouses, supermarkets, cold chains, logistics, docks and other places

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info