牛牛国产精品,久久免费的精品国产v∧,亚洲精选91

BYD all-electric forklift models and parameters-

High-quality electronic control system is responsive and easy to control

(2) Turn the key switch to the on position

When the battery electric flatbed truck is in operation, the most important thing is to maintain its battery

Most fuel forklifts are large in size and have a load capacity of more than 1 ton

3 2

When adjusted to the rabbit speed, it is suitable for use in wide and sparsely populated places and for driving over slightly longer distances

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same 5

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

Before starting work every day, check the following safety features: ※ The speaker functions normally

5 meters, and the stroke of a single oil cylinder exceeds 1

In simple terms, lifting and moving are all achieved by electric drive

BYD all-electric forklift models and parameters- Otherwise, it is very easy to cause safety accidents during subsequent use

When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed

Brushless DC motors are suitable for industrial new energy electric vehicles powered by batteries (or other DC power supplies), such as electric forklifts, electric rail-mounted flatbed trucks, rail-driven electric trucks, large tractors, etc

Electric forklift manufacturers manufacture electric hydraulic trucks, also known as electric pallet trucks, manual pallet trucks, also known as hand trucks, and trucks are also called ground bulls

Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

(4) Hydraulic distribution valve, which consists of a valve body, a lifting hydraulic cylinder valve core, a tilting hydraulic cylinder valve core and a safety valve

These data fully demonstrate that lithium-ion battery forklifts have been widely recognized by the market, and the electrification, new energy, and intelligence of forklifts are becoming new highlights

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

It is an indispensable equipment in pallet transportation and container transportation

When moving, the fork frame drives the fork back into the support plane

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

They are especially suitable for food, fishery, medical, chemical and other places

There is no problem with the normal use of lithium batteries, but even if the technical level of lithium batteries is high, there is still a small safety risk

BYD all-electric forklift models and parameters-

7-3

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system 3 When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h Charge the battery in time Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment

Keywords: side stacking, unmanned forklift, hydraulic synchronization 1

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different” Optional extras (depending on model) include Hyster Tracker telematics, several light packages, adjustable tiller, key and keypad start systems, load backrest, load wheels, a range of drive wheels, foot sensors or cold storage conversion 5 Therefore, when purchasing an electric transport truck, it is not enough for companies to only compare the price of the forklifts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info