伊人久久在线,希岛爱理一区二区三区,亚洲精品中文字幕

BYD battery storage forklift daily maintenance record sheet-

However, the voltage rises very quickly, the electrolyte boiling phenomenon occurs earlier than normal batteries, and the charging time is greatly shortened

This time, we will share with you how to successfully upgrade the drive device and improve the performance of electric forklifts

What are the precautions when buying and using a forklift? What are the precautions for buying and using a forklift? There is no industry standard in our forklift market yet

The emergence of lithium battery forklifts is a general trend

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

It is characterized by no beams, high body strength and can withstand heavy loads

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

The annual output of electric forklifts in China exceeds 300,000 units From 2015 to 2019, the output of electric forklifts in China's forklift manufacturing industry increased year by year, from 122,000 units in 2015 to 293,200 units in 2019, with an average annual compound growth rate of about 25% 3

The battery fluid should be supplemented with distilled water in time

Fork: To improve the efficiency of cargo storage and retrieval and reduce the width of the storage channel, this unmanned forklift is designed with a two-way telescopic fork to complete the cargo placement and retrieval by sideways fork entry

What advantages do lithium batteries have over storage batteries in electric forklifts? The use of lithium batteries in electric cars is affected by factors such as the popularity of charging equipment, the limited range of driving, and the wide and uncontrollable travel area

BYD battery storage forklift daily maintenance record sheet-

When in use, a buffer zone should be built between the cold storage and the charging and loading and unloading areas

If there is any abnormal sound, perform fault detection in time and do not operate with faults

A heater should be installed in the cab

2 In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

Step 7: Reverse and leave the working position

(2) Turn the key switch to the on position

FJ AC electric control of Fanji Technology is the only mature national brand that has been used in batches in the market for more than 4 years

Cab: Since most electric forklifts are used for indoor handling, there is no enclosed cab, and only a protective overhead guard is installed

Check whether the contact points are worn

BYD battery storage forklift daily maintenance record sheet-, Ltd

Manual Pallet Truck The manual pallet trucks manufactured by electric forklift manufacturers need to rely on human power to walk and are operated by handles

Its unit is generally millimeters

When the forklift battery is running out of power, it must be charged in time, and it must be parked in the charging area for charging

It is quick and easy to use and does not require any skills, making it very easy to use In simple terms, lifting and moving are all achieved by electric drive

The development of this industry should also break through the previous industrial development ideas, use advanced management and development ideas to provide sufficient financial support and rich technical reserves for the development of the industry, and promote the rapid development of the entire industry

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

At present, due to the large number of people, you need to add the editor's personal WeChat to invite to join the group

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

Let's take a look! 1

Stainless steel pallet trucks, stainless steel pallet trucks have the characteristics of corrosion resistance, high temperature resistance, and not easy to deform

You must follow the above methods to buy genuine products and enjoy perfect after-sales service

The outriggers are relatively high and have two wheels at the front end

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info