欧美日韩成人一区,国产精品高清免费在线观看,一区二区三区av

BYD imported lithium battery forklift operating procedures-

(2) Turn the key switch to the on position

3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58

This is the second basic law of thermal science

Moreover, when the vehicle is carrying goods, the mast should be tilted backward

Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

, high-efficiency logistics solutions Use both hands to push the control handle backward to between 0°-90° There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

2m, and the maximum lifting height can reach 11 meters

BYD imported lithium battery forklift operating procedures-

However, there are also some key points that need to be paid attention to during operation

Fault 2: Sliding down when loaded When an electric transport truck slides down while loading, it is usually due to oil leakage in the oil pipeline or oil joints

It can be seen that forklifts have their own unique advantages Related parameters When purchasing a forklift, you should be aware of some of its professional parameters, including the forklift's load capacity, engine brand and model, forklift battery, forklift mast, forklift tires, forklift bearings, forklift forks and other parameters If the welding current enters the battery, it will cause damage This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

won the gold award in the parts category for its high-performance electric industrial vehicle integrated drive key technology research and development, Fanji Technology (Suzhou) Co

If lubricating oil is not added regularly, the service life of the electric forklift will be shortened

The ergonomically designed control handle of the electric transport truck is convenient for left-handed operation and improves driving comfort

One side of the item should be against the shelf, and the weight of the fork load should comply with the requirements of the load center curve sign

What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur

Each thing has its own use

In order to prevent the glass from fogging, the cab glass should use electrically heated glass, or install wipers, hair dryers and other defrosting equipment to ensure the operator's vision

Especially when operating in aquatic product cold storage, it will also be corroded by salt

BYD imported lithium battery forklift operating procedures-

It can provide sufficient electrical energy according to the corresponding instructions

The electric truck uses a battery as the power source 2

After reaching full production, it will form an annual production capacity of 40,000 electric storage vehicles and key parts

Line electric flatbed trucks, rail large tractors, railway line flatbed trucks and other low-voltage rail electric flatbed trucks, all-electric trucks, electric flatbed trucks and other electric trucks

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

, and can perform other operations

The seals can be replaced 3 Their electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electrical signals, which greatly improves work efficiency and reduces the labor intensity of operators 1

Driven by environmental protection policies and technologies, the proportion of electric forklifts in my country will further increase in the future

Benefits of BYD lithium battery electric forklift: Reduce logistics costs Long life: up to three times longer than traditional lead-acid batteries Cost saving: Save more than 40% of electricity, reduce management costs, and save battery storage space And the magnetic density is higher

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info