天天影视色香欲综合网老头,亚洲va欧美va人人爽午夜,亚洲尤物视频网

BYD lithium battery forklift manufacturer's maintenance and maintenance methods-

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to achieve accurate operation in narrow spaces And the ambient temperature should not exceed 40℃ and should not be lower than -25℃ The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

At present, most companies use this technology

Electric transport trucks are powered by batteries, driven by DC motors, and advanced by hydraulic power units; they have the advantages of fast operation speed, small size, simple and flexible operation, and low noise

Dust removal of the entire circuit

with ZF (China) Investment Co

First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large 2

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers

BYD lithium battery forklift manufacturer's maintenance and maintenance methods- Changing lead-acid battery forklifts to lithium battery forklifts is not a simple battery conversion Changing from a lead-acid battery forklift to a lithium-ion forklift is not a simple battery switch

It is widely used in logistics, warehouses, factories, hospitals, schools, shopping malls, airports, stadiums, stations and airports, etc

If necessary, adjust and clean the hydraulic oil valve

It has good maneuverability and can complete various tasks, reducing the investment in other transportation costs

(2) Turn the key switch to the on position

The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

They can be divided into fully electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

In the following years, Zhongli continued to innovate and launched products with innovative design concepts such as "Big King Kong" and "Micro King Kong"

The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

Compared with traditional electric pallet trucks, it is more compact and flexible, can operate in narrow spaces such as carriages and elevators, is easy to operate, and has a more acceptable price

Many electric transport truck accessories are likely to be inferior, with low-end products pretending to be imported, and customers have difficulty distinguishing between the real and the fake

The worker's improper driving caused the vehicle to lose control and collided with Xu, resulting in Xu's death! Hidden dangers are everywhere, so keep safety in mind

Pay attention to the protection of exposed parts

The overall design of the equipment conforms to ergonomics

BYD lithium battery forklift manufacturer's maintenance and maintenance methods- The load capacity has been greatly improved compared to the traditional counterbalanced forklift AGV, with a rated load of up to 3 If it is inconvenient to tilt the mast backward for some special goods, the mast should be kept vertical and it is forbidden to tilt the mast forward during driving Easy to operate: The easier it is to operate an electric transporter, the more popular it is with customers

Winter is the peak season for accidents, accounting for about 80% of the accidents throughout the year, and more than 65% of the accidents in winter are caused by operating errors

The basic operating functions of an electric forklift are horizontal handling, stacking/picking, loading/unloading, and picking

1M, etc5 tons/2 tons/2

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

Electric pallet trucks are powered by electricity, which saves manpower, is more efficient, is not difficult to operate, and is pollution-free, low-noise, and very safe to use

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

The AC drive motor provides stronger power and continues to run under full load

The electric hydraulic truck lifts the cargo a few centimeters and confirms whether the cargo is secure The masts are generally divided into standard, two-section or three-section types

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info