黄色美女视频在线观看,国产91丝袜在线播放,第一福利在线视频

What are the components of BYD stand-up electric forklift lithium battery?- How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

When distributed to each manufacturer, diesel forklifts can be mass-produced, and the price is naturally very low, while battery forklifts are difficult to mass-produce

The load center distance of the electric forklift of the electric forklift manufacturer is 500mm Considering the width of the forklift's operating channel, if you cannot purchase a high-cost reach forklift, you also need to consider whether to choose a three-wheel or four-wheel forklift

Except for a few forklifts that are powered by manpower, the others are powered by electric motors

Many customers and friends are also puzzled 6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

Compared with imported electric trucks, domestic electric trucks generally do not have a power steering system installed

According to the latest statistics released by the Industrial Vehicle Branch of the China Construction Machinery Industry Association, the total sales volume of China's forklift market in 2019 (Ⅰ+Ⅱ+Ⅲ+Ⅳ+Ⅴ) was 608,341 units, of which electric forklifts (Ⅰ+Ⅱ+Ⅲ) were 298,637 units, accounting for almost 50%, an increase of 6

While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts The maintenance of lead-acid batteries directly affects their service life

What are the components of BYD stand-up electric forklift lithium battery?- Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts When the electric forklift is operating in the warehouse, it should be avoided that the forklift is driving and lifting at the same time 9

Do not start the forklift before the battery is fully charged

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery Maintenance-free: no need to add water, no dripping, corrosion and other environmental pollution

If companies want to know more about all-electric transport trucks, they can contact electric forklift manufacturers

Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

Counterbalanced forklift operators should try to avoid sudden stops and turns

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

Check the turn signal; 5

Check the reversing buzzer and hazard warning lights; 7

What are the components of BYD stand-up electric forklift lithium battery?- In fact, most of the reasons here are man-made 8 Therefore, overall, electric forklifts are more economical

Since it involves indoor and outdoor operations, the two configuration ratios are considered

Especially in ports, warehousing, tobacco, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

To prevent this problem, truck manufacturers recommend that you try to avoid overcharging, monitor the temperature of the electrolyte during charging, and do not use electrolytes with too high a relative density

It has high storage efficiency, strong scenario applicability and moderate cost

Therefore, lithium battery forklifts have many advantages

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

With the increase in participants, the market competition for this type of product will become more intense in the future The electric hydraulic transport truck slowly moves away 3

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info