日韩精品中文字幕一区,中文字幕一区二区三区久久网站,美女视频黄a大片欧美

BYD electric transporter maintenance content and standard pictures-

Explosion-proof electric forklift is a kind of electric forklift specially used for working in explosion-proof environment

Generally, it is one year or 1,000 hours (whichever comes first)

The development of cold chain logistics has been raised to a national level and has become a major livelihood project, which is developing rapidly

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

The technology monitors the status of forklifts and batteries and improves forklift management

It can be said that the three types of vehicles have the most models

Therefore, if the damage is serious, it is recommended not to continue using it and directly recycle the forklift

The application scenario guarantees the confidence of the product

After lowering the forks to the lowest position, withdraw the electric pallet truck

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

are electric forklifts

BYD electric transporter maintenance content and standard pictures-

The above are two common problems with the plates of all-electric transporter batteries

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same The use of helical teeth ensures optimal meshing, reduces noise levels and thus reduces noise pollution

Customized equipment transportation plans, a high-tech enterprise integrating machinery and equipment research and development, manufacturing and sales

What are the advantages of new energy electric forklifts? New energy electric forklifts have broad market prospects The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Especially when operating in aquatic product cold storage, it will also be corroded by salt

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

Find out the warranty period for new vehicles

In today's warehouses, four- or five-meter-high through-type shelves are a common configuration

BYD electric transporter maintenance content and standard pictures-

The electric pallet trucks produced by electric truck manufacturers also have these unique advantages: they have a powerful pump station that reduces energy consumption by 50%; the integrated operating handle includes stepless forward and reverse functions and an emergency reverse button to ensure the safety of the operator; and they use the mortise and tenon structure technology of Lu Ban's 72 knots, which makes maintenance easy

Driving battery products must ensure high efficiency, relative energy density and good high and low temperature test characteristics, and must have high consistency

Everyone was focusing on production, cost, price, channels, and sales, but the investment in the introduction of high-tech talents and product research and development was obviously insufficient

It is not very cost-effective

Effective competition in the early stage can improve the industry structure and reduce costs, but in the later stage, everyone's products are the same and it becomes a price war Except for a few forklifts that are powered by manpower, the others are powered by electric motors

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high Advantages: 1

Our equipment transportation relies on high-quality employees, sound process technology, quality certification system, product business consulting and after-sales service, keeping pace with the times, and providing reliable equipment transportation solutions for individuals or companies

Reduce the damage of transported items and improve the success rate of products

are important but easy to understand, so I won’t go into details here

The power manager can regularly monitor the battery status

Internal combustion forklift vs electric forklift Electric forklifts are electrically driven

This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info