av在线不卡顿,亚洲黄页视频免费观看,男女视频在线

BYD Lithium-ion Reach Forklift Operating Procedures- They are the best choice for weighing goods moving over short distances

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle

The operation of forklifts is a blessing

(CATL) The system has different power modes, which can make the vehicle flexibly give full play to its characteristics under various loads, improve the efficiency of energy utilization, and be more environmentally friendly and energy-saving When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor Large-tonnage electric pallet trucks have the advantages of energy saving, no exhaust emissions, and environmental protection

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

Before and After Images In addition to forklift lifting, forklift reversing is also one of the largest blind spots, and forklifts are driven in reverse most of the time

The cameras are all installed wirelessly and magnetically, which makes installation very easy! As we all know, as a warehousing and logistics equipment, the main function of electric forklifts is the loading, unloading and transportation of goods

The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

BYD Lithium-ion Reach Forklift Operating Procedures-

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match

Regardless of the brand of the electric forklift, learning this maintenance knowledge is not only beneficial to protecting the safety of the goods, but also beneficial to the long-term and stable use of the electric forklift, allowing the electric forklift to maintain a good condition even during high-intensity work and extend the service life of the forklift

The second step is to verticalize the mast 4

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

What are the precautions for using a reach electric forklift? An electric forklift is a forklift that uses electricity to operate, and most of them use batteries to work

Among them, whether the parts are domestically produced or imported, their size, capacity, and battery life are all important factors affecting the price of the forklift

When using electric forklifts in winter, the most important thing to pay attention to is battery maintenance

When operating a reach truck, try to use less long-term and long-distance acceleration Whether solid tire, drum spreader, transverse or similar

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

BYD Lithium-ion Reach Forklift Operating Procedures- The following is shared by BYD forklift editor: 1 It also has the advantages of ultra-low noise and ultra-low vibration Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

The following is shared by the editor of new energy forklifts: As one of the important products of electric forklifts, the sales volume of reach stackers is increasing year by year

It is also easier to use

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Good mobility, diversified working performance, reducing other loading and unloading equipment, reducing the investment of the entire handling facility

Most warehouse forklifts are now powered by electricity

The emergence of lithium batteries has greatly reduced the size and weight of some electronic devices in our lives, but has greatly extended the use time, which is a major advantage of lithium batteries

5 meters

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info