色哟哟亚洲精品一区二区,成人一区不卡,欧美人与性动交α欧美精品济南到

BYD clamp forklift maintenance specifications latest- Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc

Finally, check whether the seals of the electric pallet truck are damaged

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise If it is higher than the standard value, it indicates that the charging voltage is too high

Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

The following BYD forklift editor will share with you the precautions for using a forklift: 1

Lithium batteries save more than 40% of electricity

If dust or other dirt is found, it should be cleaned in time

Undoubtedly, under the general background of product structure adjustment in the whole industry and accelerated development of forklift electrification, relevant enterprises will break through the technical and performance limitations of electric forklifts, provide more abundant models, and bring more possibilities for industry applications

The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Stainless steel pallet trucks, stainless steel pallet trucks have the characteristics of corrosion resistance, high temperature resistance, and not easy to deform

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration

BYD clamp forklift maintenance specifications latest-

Therefore, pharmaceutical warehousing logistics has high safety performance requirements for handling equipment and high handling efficiency requirements

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible

When the forklift is operating at the warehouse entrance or exit or indoors, it should slow down when driving on the uneven road surface or the inclined road surface (iron plate)

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

0 tons, and the width of the working channel is generally 3

After years of practical experience and market accumulation, BYD Forklift has become a leader in logistics and handling solutions in many industries, and has been highly recognized by customers, helping the green development of logistics and industrial acceleration of industry enterprises

The masts are generally divided into standard, two-section or three-section types

Use a grinding wheel to grind out the weld bevel at the crack

The plate is a very important part of the battery

At the same time, manufacturers are encouraged to actively promote product upgrades and install safety monitoring devices in advance

The first step in operating an electric forklift to pick up goods is to drive close to the goods

Starting from the handle, the design of the truck is in line with the ergonomic handle to meet the load requirements of 1-5 tons

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

BYD clamp forklift maintenance specifications latest-

02 The leader violated the rules and ordered an unlicensed worker to drive a forklift, which killed him On March 7, 2019, when Xu and 11 other workers from a company in Yixing City, Jiangsu Province were carrying out wear-resistant construction on the dust bag hopper of a company in Guangxi, a production safety accident occurred, resulting in the death of one worker

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment Use both hands to push the control handle backward to between 0°-90° If it is higher than the standard value, it indicates that the charging voltage is too high

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs

BYD forklift solutions in cold chain logistics: Cold chain logistics transportation equipment has more obvious requirements for low temperature Companies in northern regions should pay more attention to this Therefore, full attention should be paid

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

It is used in food, beverage, manufacturing, logistics, cold chain logistics, shopping malls and other industries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info