欧洲亚洲一区二区,伊人伊成久久人综合网站,久久影院一区二区三区

How to push BYD four-point electric forklift when it runs out of power?- In 2019, Hangcha Group clearly proposed a high-end, electrified, and intelligent product strategy, and achieved sustained growth by relying on advanced product layout and market expansion 3 Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

The function of the outriggers is to ensure the stability of the forklift when loaded

The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

According to the response from Anhui Yufeng Warehousing Business Department, many customers are now calling to inquire about matters such as electric transport truck agents and electric pallet truck wholesales

Check the lifting, driving and hydraulic pump carbonization

Forklift is a non-manpowered tool for transporting goods in warehouses

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

Counterbalanced forklift operators should try to avoid sudden stops and turns

Or you can directly call the forklift rental phone number to rent

How to push BYD four-point electric forklift when it runs out of power?- Electric forklifts have a long service life

Pedals Removable, for use by electric pallet truck operators standing only Controls: 1

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

Its working principle is to convert chemical energy into electrical energy

The weight of the cargo should also be considered when purchasing a 3-ton electric forklift

The double-drive axle makes maintenance easier to operate and more convenient

When welding, the ambient temperature should be above 0℃

Combination of forklift and unmanned warehousing With the advent of the information age, unmanned intelligent warehousing has gradually developed, and this technology will become the mainstream concept for the development of logistics equipment in the future

Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

Use both hands to push the control handle backward to between 0°-90° Start Please follow the following steps, otherwise the electric pallet truck will not operate: (1) Make sure the power socket is firmly plugged in The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

How to push BYD four-point electric forklift when it runs out of power?-

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

During the unloading process, rapid descent and unloading are strictly prohibited; 12

If an enterprise wants to choose the most cost-effective electric warehouse forklift, it must first see how much load it needs, and then choose which type of forklift to use 8

Check whether the bearings are running well

Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

Electric forklifts are more environmentally friendly and less expensive than fuel forklifts In the production of circuits and parts, some manufacturers use inferior accessories to reduce costs As for the preventive measures, they are not without them

Electric forklift

※ The operating function is intact

亚洲国产精品高清久久久_av美女网站_日韩网站在线_一区二区三区精品视频在线观看 _精品亚洲永久免费精品_日日噜噜噜夜夜爽爽狠狠 _精品国产乱码久久久久久天美

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info