色噜噜狠狠一区二区三区,一区二区欧美国产,久久久久久婷

What are the maintenance contents of BYD cabinet forklift?- They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large

All operating functions can be easily achieved with simple buttons on the handle

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

Let's not talk about other things

The rapid development of the logistics industry requires a forklift with short charging time, long use time, stable performance, ability to withstand high-intensity operations, and high degree of automation and intelligence

There are specification restrictions for the use of electric pallet trucks and pallets

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground

The soft brush should roll freely in the hand box

What are the maintenance contents of BYD cabinet forklift?-

8T, 2T, 2

Explosion-proof equipment is selected, such as explosion-proof batteries, explosion-proof motors, explosion-proof hydraulic systems, explosion-proof joysticks, explosion-proof buttons, explosion-proof speed regulators, etc

Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive ②Maintain good ventilation during charging, and smoking and using open flames are strictly prohibited

After lifting the goods, it is strictly forbidden to stand under the fork; 8

The DC motor, therefore, the frequency characteristics of the motor will be reduced

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection Both walking and lifting are achieved by manpower BYD forklifts still perform well in cold chain logistics and have huge room for market expansion

Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope

Use lithium battery design: Compared with traditional lead-acid batteries, BYD forklift iron batteries have several major technical advantages: low operating costs and a battery cycle of about 10 years, which are characteristics and advantages that traditional rechargeable batteries cannot match

What are the maintenance contents of BYD cabinet forklift?- Although the sales of electric forklifts have been on the rise, compared with the annual sales of the two forklifts, the sales of diesel forklifts are much higher than those of lithium battery forklifts and electric forklifts The second reason is that the density of the electrolyte is too high

Transmission system 1

AC motor drive The AC drive system with AC motor as the core has the characteristics of high production efficiency and low maintenance cost

However, battery forklifts have the advantages of environmental protection, less noise, small turning radius, and low operating cost

Comparing the work efficiency between the two, the electric transport truck relies on the power system to easily lift and complete the loading, unloading and carrying tasks, and the electric transport truck only needs manual control of the handle to complete the work, and the continuous working time is longer than that relying on manpower

It is characterized by no beams, high body strength and can withstand heavy loads

It can be seen that the design structure, materials used, processes, and protective measures of the forklift itself directly determine the corrosion resistance of the forklift

The precautions for cold storage forklifts mainly include the following aspects: 1

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

Check the sensitivity of each control system

(2) High safety: Able to withstand the most severe conditions; it will not catch fire or explode after tests such as collision, extrusion, puncture, fire, high and low temperatures; and impact

Therefore, when purchasing an electric transport truck, it is not enough for companies to only compare the price of the forklifts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info