搞黄网站在线看,国产传媒在线,欧美三级网页

BYD Ride-On Forklift Maintenance and Repair Schedule Video- Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

0 to 6 5 After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

, Ltd

The following is shared by BYD forklift editor: 1

What are the operating procedures for electric forklifts? The current forklift field may already be the world of electric forklifts

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

In order to avoid many after-sales problems that affect work efficiency, it is best to choose batteries produced by manufacturers with good reputation and credibility, so that the quality is more guaranteed

During operation, the amount and weight of the operation must be controlled according to the correct operating specifications and operating sequence

Good performance: For customers, the accessories of electric transport trucks are a key part

BYD Ride-On Forklift Maintenance and Repair Schedule Video- Hangcha Group, together with Contemporary Amperex Technology Co

With the increase in participants, the market competition for this type of product will become more intense in the future

Since the birth of forklift, it has gone through a hundred years of changes and now has taken the "C position", becoming an indispensable equipment in production and warehousing operations

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

In AC, you also need to distinguish between full AC and partial AC, because this involves the issue of subsequent maintenance costs

Slow down before starting, slow down for a few seconds and then speed up; 5

And the magnetic density is higher

They are not affected by severe cold or hot environments, including working in some environments with poor lighting, etc

For a time, hydrogen fuel forklifts have become a new hot spot It is more efficient to use and can save both time and effort

So, what kind of electric truck is the ideal truck? 1

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4 Disadvantages: Manual transport trucks rely on human power to pull, which consumes manpower, requires effort when the ground is uneven, and has low transport efficiency

BYD Ride-On Forklift Maintenance and Repair Schedule Video- However, as the country's environmental protection requirements continue to increase, the market demand for diesel forklifts will gradually decrease in the future

direct and convenient, and the maintenance performance is better than that of horizontal motors

The larger the load, the more expensive it is

How to improve Reduce the error rate: At present, many warehouse management still relies on manual work

Clean the lifting chain, chain shaft and add lubricating oil

Considering the width of the forklift's operating channel, if you cannot purchase a high-cost reach forklift, you also need to consider whether to choose a three-wheel or four-wheel forklift

※ The brake function is normal

(3) During the loading and unloading process, the forklift must be braked

Hyster has added a new stand-on electric pallet truck, the S2

Then there is the size of the battery box, large and small batteries

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator

Clean the gear box and change the gear oil We always take meeting customer requirements as our business philosophy, strictly control quality, strive to improve work efficiency, and strive to provide individuals or companies with electric trucks that meet market needs

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info