国产99精品,欧美日产国产成人免费图片,中文字幕一区久

BYD Lithium Battery Warehouse Forklift Forklift Operation Method -

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Steering 1

Stable and reliable performance: reasonable internal circuit design, complete protection and low failure rate; 3

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

considerable

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

The gantry is hinged on the front axle support body and consists of a set of parallel steel frames and a sliding bracket for fixing the fork

Lithium batteries are widely used in a wide range of fields ※ Hydraulic function is normal

"Customer-oriented, technological breakthrough" In the face of this challenge, we worked with customers to conduct a comprehensive analysis and evaluation of the power drive of electric forklifts

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

Its smart handle integrates all switch buttons in the best reach position for easy operation

It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production

BYD Lithium Battery Warehouse Forklift Forklift Operation Method -

5 ton electric forklift, 3 ton electric forklift, three-point counterbalanced electric forklift, four-point counterbalanced electric forklift, etc

Compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric forklifts have been recognized by the majority of users

Currently, the first and second types have been put into normal use, and there are not many forklifts using the third type of electric technology that have been put into the market

If any abnormality is found during the forklift operation, the principle of "stop and wait" must be followed 2 How to maintain and repair BYD forklifts? Daily maintenance is mainly about cleaning the forklift and external inspection

For electric forklifts, not only does it produce exhaust gas, but it also runs more smoothly

Flexible switching or modification of various attachments such as forks, clamps, side shifters, and adjustable forks

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

As a new energy electric forklift, it has the advantages of energy saving, environmental protection and simple maintenance

If it is higher than the standard value, it indicates that the charging voltage is too high

BYD Lithium Battery Warehouse Forklift Forklift Operation Method -

Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

The electric transport truck manufacturer reminds that the forklift should be lowered to the lowest position and the power supply should be disconnected after the work is completed

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation 3 Body Specifications The length, width, edge shape and size of the vehicle body should be consistent with the size of the goods and the width of the entrance

The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup

Electric hydraulic truck The electric hydraulic transporter manufactured by the electric forklift manufacturer is driven by electricity and operated by a handle

Prevent vehicles from carrying people; 7

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

Forklifts should be maintained daily and weekly on time

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000 (2) Do not raise the forks too high when driving

Mechanism and principle: 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info