欧美激情aⅴ一区二区三区,久久香蕉一区,欧美久久亚洲

Where is the professional maintenance point for BYD three-wheel electric forklift?- Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

Moreover, when the vehicle is carrying goods, the mast should be tilted backward

After years of practical experience and market accumulation, BYD Forklift has become a leader in logistics and handling solutions in many industries, and has been highly recognized by customers, helping the green development of logistics and industrial acceleration of industry enterprises

Regardless of the brand of the electric forklift, the electric forklift will cause safety problems due to lack of maintenance

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Stainless steel pallet trucks, stainless steel pallet trucks have the characteristics of corrosion resistance, high temperature resistance, and not easy to deform

These reflected that the company lacked basic safety management, employee safety training and education were not in place, work systems were poorly implemented, and employees had very weak safety awareness

It effectively improves the work efficiency of manual labor, uses batteries for operation, and is environmentally friendly and pollution-free

When moving, the fork brings the goods back so that the center of gravity of the goods is within the support surface

It effectively improves the work efficiency of manual labor, uses batteries for operation, and is environmentally friendly and pollution-free

When driving on a wet or slippery road, slow down when turning and drive carefully

Where is the professional maintenance point for BYD three-wheel electric forklift?-

Check the fan window; 8

Steering 1

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

won the gold award in the parts category for its high-performance electric industrial vehicle integrated drive key technology research and development, Fanji Technology (Suzhou) Co

It is often used for stacking and loading and unloading of goods in warehouses

The fast-paced lifestyle and work mode have changed people's consumption patterns

Full load operation is not allowed

There is no need to replace easily damaged electronic parts, so electric forklifts are more economical

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

3 When moving, the fork brings the goods back so that the center of gravity of the goods is within the support surface

Where is the professional maintenance point for BYD three-wheel electric forklift?- Electric trucks save time, effort, energy, cost and efficient operation

The market sales are increasing year by year

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

No matter how much the forklift costs, you can't buy it casually when buying batteries

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

They are widely used in the warehousing industry because of their compact body, flexible mobility, light weight and good environmental performance

Not only electric pallet trucks, but also electric forklifts and electric stackers, enterprises must consider whether they are safe

To prevent this problem, truck manufacturers recommend that you try to avoid overcharging, monitor the temperature of the electrolyte during charging, and do not use electrolytes with too high a relative density

They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc

Since the birth of forklift, it has gone through a hundred years of changes and now has taken the "C position", becoming an indispensable equipment in production and warehousing operations

Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

Companies can consult electric transport truck manufacturers to choose the most cost-effective transport truck

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info