九一成人免费视频,秋霞蜜臀av久久电影网免费,日韩成人动漫

BYD Lithium Battery Forklift Manufacturer Address-

So what are the advantages of electric forklifts? Let's take a look: 1

The air gap can be adjusted multiple times

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust It is deeply favored by dealers and enterprises everywhere

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

Avoid using in blind areas; 9

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

They are especially suitable for food, fishery, medical, chemical and other places

Since it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as medicine, food and other industries

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground

Hold the left and right handles of the control handle with both hands, press them down to the tilted position, and move the control handle left and right to steer the vehicle

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

BYD Lithium Battery Forklift Manufacturer Address- (5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects5 meters, 5 They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance If it is lower than the limited working voltage, the forklift should stop running immediately It is recommended to use them outdoors 011 In particular, managers took the lead in illegal operations, and production safety was out of control

Key switch The function of this switch is to control the connection and disconnection of the circuit

How to improve the working efficiency of forklifts, reduce customer maintenance costs and improve safety performance has been a hot topic for forklift manufacturers in recent years

Analysis of the advantages of BYD new energy forklifts As we all know, the current application of new energy technology has been developing steadily, and its main uses are also relatively common

When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed

If it is lower than the standard value, it indicates that the charging voltage is too low 3

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

BYD Lithium Battery Forklift Manufacturer Address- Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly Cause of the accident: The company's safety management was chaotic, the shift teacher drove a forklift without a license, the workers secretly slept during working hours, and materials were randomly piled up in the workshop

The same is true for food logistics

Using batteries as the power device, it is green and environmentally friendly and has been widely used in all aspects of warehousing, logistics and transportation

※ The brake function is normal

The motor provides power to drive the equipment to move

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

When maintaining an explosion-proof electric forklift, you should follow strict maintenance regulations, use the correct lubricating oil, and check each component of the forklift to ensure the safe and reliable operation of the equipment

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

Electric forklifts use lithium battery fast charging technology, so there is no need to worry about battery life issues

At the same time, the product replacement cycle has been significantly shortened

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info