亚洲视频一二三区,亚洲精品乱码久久久久久,亚洲1234区

BYD clamp forklift forklift operation video -

In this case, the forklift must have good anti-slip capabilities

Charge the battery in time

Automatic power-off function: When the forklift stops for more than 10 minutes, the power switch can be automatically cut off regardless of whether the key switch is closed When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

If you add stackers in three dimensions, different heights, gantry structures, legs, legs, forward movement, etc

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

We need to add a proper amount of lubricating oil to the joints of the various parts of the electric pallet truck and tighten the loose fasteners

Pedals Removable, for use by electric pallet truck operators standing only Controls: 1

What are they? Common power system failures are mainly manifested in failure to charge, charging voltage is too low, and charging voltage is too high After lowering the forks to the lowest position, withdraw the electric pallet truck

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

The models and configurations of the two equipment are different They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc

BYD clamp forklift forklift operation video - Line electric flatbed trucks, rail large tractors, railway line flatbed trucks and other low-voltage rail electric flatbed trucks, all-electric trucks, electric flatbed trucks and other electric trucks

Especially in ports, warehousing, tobacco, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

This product breaks through the concept of traditional battery forklifts, combines the advantages of internal combustion forklifts and electric forklifts, has a low center of gravity, compact structure, comfortable driving, green and environmentally friendly, can be flexibly operated in a small space, and its main performance indicators have reached the international advanced level

As the name suggests, an electric pallet truck is a type of truck that uses a battery as its power source and an electric motor as its motive force, while a manual pallet truck mainly relies on manpower to operate

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs Customers are not allowed to disassemble and adjust the motor stator components without permission

A higher service life represents lower use costs, plus savings in maintenance staff salaries and raw material costs

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance, Ltd1 times to 0 Next, let's take a look at the special requirements for using electric forklifts in winter At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications

BYD clamp forklift forklift operation video - The battery is the power source of the vehicle and should be charged in time and maintained frequently Therefore, overall, electric forklifts are more economical First, let's look at the raising and lowering

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration

Forklifts should be maintained daily and weekly on time

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

If you have purchased a forklift before and it is a second-hand one that has been around for some time, the cost of repairing it is too high, so prepare to buy a new one

The high-quality electronic control system is easy to use and can be controlled easily

The company has more than 10 years of experience in the research and development and manufacturing of standard electric warehouse forklifts

The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info