中文字幕免费一区二区三区,中文字幕国产亚洲,澳门av一区二区三区

Where is the professional maintenance point for BYD battery forklift?-

(1) Ordinary internal combustion forklifts: They are generally powered by diesel, gasoline, liquefied petroleum gas or natural gas engines

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

(3) Hydraulic pump, which can be a vane pump Or gear pump

The following is shared by the BYD Forklift Editor: In the field of industrial vehicles, BYD has made the greatest contribution to the application of lithium batteries in forklifts

Electric truck manufacturers hope that everyone will pay attention to this

It can provide sufficient electrical energy according to the corresponding instructions

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation Lithium-ion batteries and lead-acid batteries are power batteries of two different systems, and the battery principles are also different

We will lead the development trend of hybrid and electric technologies and provide customers with more energy-saving, compact, efficient and intelligent solutions

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

are complete, and the manufacturer's name, product specifications, model, production date, trademark, product serial number and other information should be carefully checked and identified

Where is the professional maintenance point for BYD battery forklift?- "It is difficult to see the position of the forklift when it is lifted or lowered, especially for warehouse forklifts Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

The hydraulic synchronization problem is a difficulty in this type of design

3 meters, and at least two masts are required; but the lifting height of the forklift will conflict with the mast height and Hangzhou Pengcheng New Energy Co

Except for some companies, the overall technical strength of domestic lithium battery forklifts is not high at present

The fully electric pallet truck uses a 24V electronic system, and a set of integrated circuit controllers to steplessly adjust its speed to ensure a relatively stable speed and acceleration during driving Check whether the synchronous motor rotates flexibly and whether there is false friction

The new version of the regulations requires the installation of safety monitoring devices

Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

The forklift can only be moved with the current generated by the battery, and never with rectified AC to avoid damaging electronic components

7 There is no air filter, no oil filter, no engine oil, which is easy to replace and can be used for a long time

In response to this, some companies should design vehicles according to the specifications of lithium batteries, making the vehicle more compact and more convenient to operate

Where is the professional maintenance point for BYD battery forklift?-

After lifting the goods, it is strictly forbidden to stand under the fork; 8

Make sure to observe your surroundings and drive slowly when turning; 8

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

When vehicles enter and exit containers to load and unload goods, they should slow down, pay attention to the entry and exit height, and do not let the goods hit the roof to avoid damage to the goods

3 3 The staff who heard the abnormal noise did not take the corresponding emergency measures in time, resulting in the shaft being scrapped

Another very common problem with all-electric truck batteries is the corrosion of the positive plate grid

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

For a time, hydrogen fuel forklifts have become a new hot spot

The market demand for cold storage forklifts is huge

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

Therefore, it is very necessary to check and deal with these minor problems

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info