91精品国产91久久久久久黑人,日韩av自拍,精品999日本久久久影院

What are the maintenance items of BYD cold storage forklift?-

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power, another important consideration is the price of the forklift ※ The brake function is normal

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

No human intervention is required during the transportation process, and it can work continuously for 24 hours

The AGV navigation system, vehicle system, warehouse management system, dispatching system, management system and other software systems were jointly developed by Anhui Yufeng, Hefei University of Technology, Chinese Academy of Sciences and other intelligent unmanned robot technology teams

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions Flexible control and precise positioning; 3

Warehouse forklift is a practical tool commonly used in warehouses

(4) Unmanned and intelligent Affected by the rapid development of intelligent manufacturing and smart warehousing, electric forklifts are also developing in the direction of unmanned and intelligent

What are the maintenance items of BYD cold storage forklift?- At the same time, the product replacement cycle has been significantly shortened

They may also have certain failures during use

The battery fluid should be supplemented with distilled water in time

It is also very suitable to consider this in the future

It has the following features: small size, light weight, can travel and operate in very narrow passages, and can also enter floors and elevators with light loads; all of its control buttons are installed on the handle, and it also has functions such as lifting and horn, making it easy and convenient to operate

Hydraulic system (1) Lifting hydraulic cylinder, the top of which is fixed to the lifting gantry, controls the lifting or lowering of the fork

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices

It is not allowed to stand on the fork or pallet to work

It is not allowed to unload goods by picking, pushing or bumping the pallet with a fork; 10

When the cargo is overweight or the system pressure is abnormal, the system will issue an alarm signal; ④ A sensor for detecting the presence of cargo on the shelf The battery is the power source of the vehicle and should be charged in time and maintained regularly

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

What are the maintenance items of BYD cold storage forklift?-

Advantages: Manual trucks are pulled by hand and operated with handles, which is extremely simple, flexible, light in weight, energy-saving and environmentally friendly, and have excellent performance

The entire freight process can be completed by one person, which has replaced manual transport trucks to a certain extent

It can provide enterprises with complete warehousing solutions, allowing enterprises to purchase electric transport trucks that are suitable for them and have the highest cost-effectiveness

7 In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

8 At the same time, Gongyan Industry Research Institute also provides industry data, industry research, policy research, industry chain consulting, industry maps, industry planning, feasibility analysis, business plans, IPO consulting and other products and solutions Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

(3) After unloading, the forks should be lowered to the normal driving position before driving

The market demand for cold storage forklifts is huge

Most fuel forklifts are large in size and have a load capacity of more than 1 ton

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions When picking up materials from the loading area, the action flow is shown in Figure 1-(a)

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info